dmesg - first run of the BYTE unix benchmark
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-67-generic (buildd@brownie) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 (Ubuntu 3.2.0-67.101-generic 3.2.60)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3P/P35-DS3P, BIOS F12 06/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 3583MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5030] f5030
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ dfeda000-dfee0000
[ 0.000000] RAMDISK: 35712000 - 36b81000
[ 0.000000] ACPI: RSDP 00000000000f6a20 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000dfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096749
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061928
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8152644k/8912896k available (6595k kernel code, 525900k absent, 234352k reserved, 6611k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.068 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.13 BogoMIPS (lpj=12000272)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004028] Security Framework initialized
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004043] Yama: becoming mindful.
[ 0.004563] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010482] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011877] Mount-cache hash table entries: 256
[ 0.012012] Initializing cgroup subsys cpuacct
[ 0.012017] Initializing cgroup subsys memory
[ 0.012025] Initializing cgroup subsys devices
[ 0.012027] Initializing cgroup subsys freezer
[ 0.012028] Initializing cgroup subsys blkio
[ 0.012035] Initializing cgroup subsys perf_event
[ 0.012059] CPU: Physical Processor ID: 0
[ 0.012060] CPU: Processor Core ID: 0
[ 0.012062] mce: CPU supports 6 MCE banks
[ 0.012069] CPU0: Thermal monitoring enabled (TM2)
[ 0.012072] using mwait in idle threads.
[ 0.014151] ACPI: Core revision 20110623
[ 0.016028] ftrace: allocating 26609 entries in 105 pages
[ 0.020383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062070] CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 98000
[ 0.152032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152123] #2
[ 0.152124] smpboot cpu 2: start_ip = 98000
[ 0.244028] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244097] #3 Ok.
[ 0.244098] smpboot cpu 3: start_ip = 98000
[ 0.336035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336055] Brought up 4 CPUs
[ 0.336057] Total of 4 processors activated (24000.02 BogoMIPS).
[ 0.340183] devtmpfs: initialized
[ 0.340910] EVM: security.selinux
[ 0.340912] EVM: security.SMACK64
[ 0.340913] EVM: security.capability
[ 0.341040] PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
[ 0.341040] print_constraints: dummy:
[ 0.341040] RTC time: 7:54:00, date: 08/11/14
[ 0.341040] NET: Registered protocol family 16
[ 0.341040] Trying to unpack rootfs image as initramfs...
[ 0.341040] ACPI: bus type pci registered
[ 0.341040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.341040] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.351052] PCI: Using configuration type 1 for base access
[ 0.352168] bio: create slab at 0
[ 0.352378] ACPI: Added _OSI(Module Device)
[ 0.352378] ACPI: Added _OSI(Processor Device)
[ 0.352378] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.352378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.352645] ACPI: EC: Look up EC in DSDT
[ 0.356237] ACPI: Interpreter enabled
[ 0.356242] ACPI: (supports S0 S3 S4 S5)
[ 0.356257] ACPI: Using IOAPIC for interrupt routing
[ 0.359255] ACPI: No dock devices found.
[ 0.359257] HEST: Table not found.
[ 0.359259] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.359297] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.359382] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.359384] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.359386] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.359387] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.359389] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.359399] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.359431] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.359460] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.359463] pci 0000:00:01.0: PME# disabled
[ 0.359493] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.359528] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
[ 0.359569] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.359604] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
[ 0.359647] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.359681] pci 0000:00:1a.2: reg 20: [io 0xe500-0xe51f]
[ 0.359728] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.359743] pci 0000:00:1a.7: reg 10: [mem 0xfa205000-0xfa2053ff]
[ 0.359818] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.359830] pci 0000:00:1b.0: reg 10: [mem 0xfa200000-0xfa203fff 64bit]
[ 0.359884] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.359888] pci 0000:00:1b.0: PME# disabled
[ 0.359904] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.360063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.360066] pci 0000:00:1c.0: PME# disabled
[ 0.360085] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.360142] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.360145] pci 0000:00:1c.4: PME# disabled
[ 0.360162] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.360218] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.360221] pci 0000:00:1c.5: PME# disabled
[ 0.360239] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.360274] pci 0000:00:1d.0: reg 20: [io 0xe200-0xe21f]
[ 0.360316] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.360351] pci 0000:00:1d.1: reg 20: [io 0xe300-0xe31f]
[ 0.360393] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.360428] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
[ 0.360475] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.360489] pci 0000:00:1d.7: reg 10: [mem 0xfa204000-0xfa2043ff]
[ 0.360561] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.360612] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.360681] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.360684] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.360726] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 0.360741] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.360748] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.360754] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.360760] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.360767] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.360773] pci 0000:00:1f.2: reg 24: [mem 0xfa206000-0xfa2067ff]
[ 0.360810] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.360812] pci 0000:00:1f.2: PME# disabled
[ 0.360825] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.360838] pci 0000:00:1f.3: reg 10: [mem 0xfa207000-0xfa2070ff 64bit]
[ 0.360854] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.360907] pci 0000:01:00.0: [10de:0613] type 0 class 0x000300
[ 0.360919] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.360931] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.360944] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.360952] pci 0000:01:00.0: reg 24: [io 0xa000-0xa07f]
[ 0.360961] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.361025] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.361028] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.361030] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.361034] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.361065] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.361068] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.361118] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.361197] pci 0000:03:00.0: reg 24: [mem 0xfa000000-0xfa001fff]
[ 0.361254] pci 0000:03:00.0: PME# supported from D3hot
[ 0.361258] pci 0000:03:00.0: PME# disabled
[ 0.361283] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.361304] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
[ 0.361317] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
[ 0.361329] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
[ 0.361341] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
[ 0.361353] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
[ 0.361428] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.361439] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.361442] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.361445] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.361501] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.361518] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.361546] pci 0000:04:00.0: reg 18: [mem 0xf9000000-0xf9000fff 64bit]
[ 0.361578] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.361649] pci 0000:04:00.0: supports D1 D2
[ 0.361651] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.361656] pci 0000:04:00.0: PME# disabled
[ 0.361672] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.361680] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.361683] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.361686] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.361713] pci 0000:05:00.0: [1814:0301] type 0 class 0x000280
[ 0.361728] pci 0000:05:00.0: reg 10: [mem 0xfa100000-0xfa107fff]
[ 0.361804] pci 0000:05:01.0: [1106:3038] type 0 class 0x000c03
[ 0.361844] pci 0000:05:01.0: reg 20: [io 0xd000-0xd01f]
[ 0.361880] pci 0000:05:01.0: supports D1 D2
[ 0.361882] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361885] pci 0000:05:01.0: PME# disabled
[ 0.361898] pci 0000:05:01.1: [1106:3038] type 0 class 0x000c03
[ 0.361939] pci 0000:05:01.1: reg 20: [io 0xd100-0xd11f]
[ 0.361974] pci 0000:05:01.1: supports D1 D2
[ 0.361976] pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361979] pci 0000:05:01.1: PME# disabled
[ 0.361993] pci 0000:05:01.2: [1106:3104] type 0 class 0x000c03
[ 0.362007] pci 0000:05:01.2: reg 10: [mem 0xfa10d000-0xfa10d0ff]
[ 0.362068] pci 0000:05:01.2: supports D1 D2
[ 0.362070] pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362073] pci 0000:05:01.2: PME# disabled
[ 0.362097] pci 0000:05:06.0: [104c:8024] type 0 class 0x000c00
[ 0.362111] pci 0000:05:06.0: reg 10: [mem 0xfa10c000-0xfa10c7ff]
[ 0.362120] pci 0000:05:06.0: reg 14: [mem 0xfa108000-0xfa10bfff]
[ 0.362179] pci 0000:05:06.0: supports D1 D2
[ 0.362180] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.362184] pci 0000:05:06.0: PME# disabled
[ 0.362216] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.362219] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.362222] pci 0000:00:1e.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.362227] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.362229] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.362230] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.362232] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.362234] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.362251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.362311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.362336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.362364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.362384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.362445] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.362448] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.362449] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.368691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.368725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.368758] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.368792] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.368825] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.368857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.368889] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.368921] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.369005] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.369005] vgaarb: loaded
[ 0.369005] vgaarb: bridge control possible 0000:01:00.0
[ 0.369005] i2c-core: driver [aat2870] using legacy suspend method
[ 0.369005] i2c-core: driver [aat2870] using legacy resume method
[ 0.369005] SCSI subsystem initialized
[ 0.369175] libata version 3.00 loaded.
[ 0.369175] usbcore: registered new interface driver usbfs
[ 0.369175] usbcore: registered new interface driver hub
[ 0.369437] usbcore: registered new device driver usb
[ 0.369694] PCI: Using ACPI for IRQ routing
[ 0.369694] PCI: pci_cache_line_size set to 64 bytes
[ 0.369694] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.369694] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.369694] NetLabel: Initializing
[ 0.369694] NetLabel: domain hash size = 128
[ 0.369694] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369694] NetLabel: unlabeled traffic allowed by default
[ 0.369694] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.369694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.369694] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.383910] Switching to clocksource hpet
[ 0.385901] AppArmor: AppArmor Filesystem Enabled
[ 0.385926] pnp: PnP ACPI init
[ 0.385941] ACPI: bus type pnp registered
[ 0.386013] pnp 00:00: [bus 00-3f]
[ 0.386015] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.386017] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.386018] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.386020] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.386022] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.386023] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.386075] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.386128] pnp 00:01: [io 0x0010-0x001f]
[ 0.386130] pnp 00:01: [io 0x0022-0x003f]
[ 0.386131] pnp 00:01: [io 0x0044-0x005f]
[ 0.386133] pnp 00:01: [io 0x0062-0x0063]
[ 0.386134] pnp 00:01: [io 0x0065-0x006f]
[ 0.386136] pnp 00:01: [io 0x0074-0x007f]
[ 0.386137] pnp 00:01: [io 0x0091-0x0093]
[ 0.386138] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.386140] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.386141] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.386143] pnp 00:01: [io 0x0290-0x029f]
[ 0.386144] pnp 00:01: [io 0x0800-0x087f]
[ 0.386146] pnp 00:01: [io 0x0290-0x0294]
[ 0.386147] pnp 00:01: [io 0x0880-0x088f]
[ 0.386211] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.386213] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.386215] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.386217] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.386219] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.386221] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386230] pnp 00:02: [dma 4]
[ 0.386231] pnp 00:02: [io 0x0000-0x000f]
[ 0.386233] pnp 00:02: [io 0x0080-0x0090]
[ 0.386234] pnp 00:02: [io 0x0094-0x009f]
[ 0.386235] pnp 00:02: [io 0x00c0-0x00df]
[ 0.386257] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.386292] pnp 00:03: [irq 0 disabled]
[ 0.386300] pnp 00:03: [irq 8]
[ 0.386302] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.386329] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.386347] pnp 00:04: [io 0x0070-0x0073]
[ 0.386373] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.386380] pnp 00:05: [io 0x0061]
[ 0.386402] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.386408] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.386414] pnp 00:06: [irq 13]
[ 0.386439] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.386600] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.386604] pnp 00:07: [irq 4]
[ 0.386651] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.386772] pnp 00:08: [io 0x0378-0x037f]
[ 0.386777] pnp 00:08: [irq 7]
[ 0.386815] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.386890] pnp 00:09: [io 0x0400-0x04bf]
[ 0.386928] system 00:09: [io 0x0400-0x04bf] has been reserved
[ 0.386930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387055] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.387103] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.387105] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387206] pnp 00:0b: [mem 0x000d6000-0x000d7fff]
[ 0.387208] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.387209] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.387211] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.387212] pnp 00:0b: [mem 0xdfee0000-0xdfefffff]
[ 0.387214] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.387215] pnp 00:0b: [mem 0x00100000-0xdfedffff]
[ 0.387217] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.387218] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
[ 0.387220] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.387221] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.387222] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.387224] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.387225] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.387280] system 00:0b: [mem 0x000d6000-0x000d7fff] has been reserved
[ 0.387282] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.387284] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.387286] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.387288] system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.387290] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.387293] system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.387295] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.387297] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.387301] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.387303] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.387305] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.387307] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.387309] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.387312] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.387325] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
[ 0.387358] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.387363] pnp: PnP ACPI: found 13 devices
[ 0.387364] ACPI: ACPI bus type pnp unregistered
[ 0.394816] PCI: max bus depth: 1 pci_try_num: 2
[ 0.394850] pci 0000:00:1c.5: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
[ 0.394853] pci 0000:00:1c.5: BAR 15: reassigned [mem 0xfa300000-0xfa5fffff pref]
[ 0.394856] pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa600000-0xfa7fffff 64bit pref]
[ 0.394859] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa800000-0xfa9fffff]
[ 0.394862] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfaa00000-0xfabfffff 64bit pref]
[ 0.394864] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref]
[ 0.394867] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.394869] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.394872] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.394875] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.394878] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.394880] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.394884] pci 0000:00:1c.0: bridge window [mem 0xfa800000-0xfa9fffff]
[ 0.394887] pci 0000:00:1c.0: bridge window [mem 0xfaa00000-0xfabfffff 64bit pref]
[ 0.394892] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.394894] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.394898] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.394901] pci 0000:00:1c.4: bridge window [mem 0xfa600000-0xfa7fffff 64bit pref]
[ 0.394906] pci 0000:04:00.0: BAR 6: assigned [mem 0xfa300000-0xfa30ffff pref]
[ 0.394908] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.394910] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.394914] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.394917] pci 0000:00:1c.5: bridge window [mem 0xfa300000-0xfa5fffff pref]
[ 0.394922] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.394924] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.394928] pci 0000:00:1e.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.394943] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.394947] pci 0000:00:01.0: setting latency timer to 64
[ 0.394952] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.394956] pci 0000:00:1c.0: setting latency timer to 64
[ 0.394961] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.394965] pci 0000:00:1c.4: setting latency timer to 64
[ 0.394973] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.394977] pci 0000:00:1c.5: setting latency timer to 64
[ 0.394983] pci 0000:00:1e.0: setting latency timer to 64
[ 0.394986] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.394988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.394989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.394991] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.394993] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.394995] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.394996] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.394998] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.395000] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.395002] pci_bus 0000:02: resource 1 [mem 0xfa800000-0xfa9fffff]
[ 0.395004] pci_bus 0000:02: resource 2 [mem 0xfaa00000-0xfabfffff 64bit pref]
[ 0.395006] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.395007] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
[ 0.395009] pci_bus 0000:03: resource 2 [mem 0xfa600000-0xfa7fffff 64bit pref]
[ 0.395011] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.395013] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.395014] pci_bus 0000:04: resource 2 [mem 0xfa300000-0xfa5fffff pref]
[ 0.395016] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.395018] pci_bus 0000:05: resource 1 [mem 0xfa100000-0xfa1fffff]
[ 0.395020] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.395021] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.395023] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.395025] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.395026] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.395058] NET: Registered protocol family 2
[ 0.395225] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.396286] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.399146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.399521] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.399523] TCP reno registered
[ 0.399536] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.399590] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.399728] NET: Registered protocol family 1
[ 0.399751] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399768] pci 0000:00:1a.0: PCI INT A disabled
[ 0.399785] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.399801] pci 0000:00:1a.1: PCI INT B disabled
[ 0.399809] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.399825] pci 0000:00:1a.2: PCI INT C disabled
[ 0.399831] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.399858] pci 0000:00:1a.7: PCI INT C disabled
[ 0.399873] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.399888] pci 0000:00:1d.0: PCI INT A disabled
[ 0.399897] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.399913] pci 0000:00:1d.1: PCI INT B disabled
[ 0.399918] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.399934] pci 0000:00:1d.2: PCI INT C disabled
[ 0.399940] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.399972] pci 0000:00:1d.7: PCI INT A disabled
[ 0.399993] pci 0000:01:00.0: Boot video device
[ 0.400078] pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.400097] pci 0000:05:01.0: PCI INT A disabled
[ 0.400104] pci 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.400121] pci 0000:05:01.1: PCI INT B disabled
[ 0.416025] pci 0000:05:01.2: BAR 0: set to [mem 0xfa10d000-0xfa10d0ff] (PCI address [0xfa10d000-0xfa10d0ff])
[ 0.416029] pci 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.416062] pci 0000:05:01.2: PCI INT C disabled
[ 0.416067] PCI: CLS 32 bytes, default 64
[ 0.416069] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.416071] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000
[ 0.416073] software IO TLB at phys 0xdbeda000 - 0xdfeda000
[ 0.416407] audit: initializing netlink socket (disabled)
[ 0.416422] type=2000 audit(1407743640.412:1): initialized
[ 0.432897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.435103] VFS: Disk quotas dquot_6.5.2
[ 0.435144] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.435524] fuse init (API version 7.17)
[ 0.435594] msgmni has been set to 15923
[ 0.435962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.435999] io scheduler noop registered
[ 0.436010] io scheduler deadline registered
[ 0.436036] io scheduler cfq registered (default)
[ 0.436116] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.436140] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.436175] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.436204] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.436251] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.436280] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.436323] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.436352] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.436413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.436428] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.436474] intel_idle: MWAIT substates: 0x22220
[ 0.436475] intel_idle: does not run on family 6 model 23
[ 0.436534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.436538] ACPI: Power Button [PWRB]
[ 0.436584] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.436586] ACPI: Power Button [PWRF]
[ 0.440983] ERST: Table is not found!
[ 0.440985] GHES: HEST is not enabled!
[ 0.461353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.631484] Freeing initrd memory: 20924k freed
[ 0.740407] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.740603] Linux agpgart interface v0.103
[ 0.741837] brd: module loaded
[ 0.742428] loop: module loaded
[ 0.742516] ahci 0000:00:1f.2: version 3.0
[ 0.742524] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.742568] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.742594] ahci: SSS flag set, parallel bus scan disabled
[ 0.742621] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.742624] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.742627] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.780531] scsi0 : ahci
[ 0.780621] scsi1 : ahci
[ 0.780701] scsi2 : ahci
[ 0.780779] scsi3 : ahci
[ 0.780860] scsi4 : ahci
[ 0.780939] scsi5 : ahci
[ 0.781034] ata1: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206100 irq 44
[ 0.781037] ata2: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206180 irq 44
[ 0.781039] ata3: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206200 irq 44
[ 0.781041] ata4: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206280 irq 44
[ 0.781043] ata5: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206300 irq 44
[ 0.781045] ata6: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206380 irq 44
[ 0.781067] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.796037] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.796041] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.796047] ahci 0000:03:00.0: setting latency timer to 64
[ 0.796333] scsi6 : ahci
[ 0.796416] scsi7 : ahci
[ 0.796475] ata7: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 0.796478] ata8: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 0.796552] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.796588] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.796601] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.796826] Fixed MDIO Bus: probed
[ 0.796843] tun: Universal TUN/TAP device driver, 1.6
[ 0.796844] tun: (C) 1999-2004 Max Krasnyansky
[ 0.796881] PPP generic driver version 2.4.2
[ 0.796954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.796965] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.796978] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.796981] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.797020] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.800906] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.800917] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000
[ 0.816012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 0.816142] hub 1-0:1.0: USB hub found
[ 0.816147] hub 1-0:1.0: 6 ports detected
[ 0.816216] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.816227] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.816229] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.816263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.820163] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.820172] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000
[ 0.836013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 0.836129] hub 2-0:1.0: USB hub found
[ 0.836134] hub 2-0:1.0: 6 ports detected
[ 0.836204] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.836215] ehci_hcd 0000:05:01.2: EHCI Host Controller
[ 0.836249] ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 3
[ 0.836276] ehci_hcd 0000:05:01.2: irq 16, io mem 0xfa10d000
[ 0.848013] ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 0.848148] hub 3-0:1.0: USB hub found
[ 0.848152] hub 3-0:1.0: 4 ports detected
[ 0.848217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.848226] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.848237] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.848244] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.848246] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.848281] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 0.848300] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 0.848391] hub 4-0:1.0: USB hub found
[ 0.848394] hub 4-0:1.0: 2 ports detected
[ 0.848443] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.848450] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.848452] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.848485] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
[ 0.848511] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 0.848601] hub 5-0:1.0: USB hub found
[ 0.848604] hub 5-0:1.0: 2 ports detected
[ 0.848658] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.848665] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.848667] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.848699] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
[ 0.848718] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 0.848805] hub 6-0:1.0: USB hub found
[ 0.848808] hub 6-0:1.0: 2 ports detected
[ 0.848858] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.848865] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.848867] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.848900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
[ 0.848918] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 0.849008] hub 7-0:1.0: USB hub found
[ 0.849010] hub 7-0:1.0: 2 ports detected
[ 0.849059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.849066] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.849068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.849099] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
[ 0.849124] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 0.849213] hub 8-0:1.0: USB hub found
[ 0.849215] hub 8-0:1.0: 2 ports detected
[ 0.849266] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.849272] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.849275] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.849306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
[ 0.849327] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 0.849415] hub 9-0:1.0: USB hub found
[ 0.849418] hub 9-0:1.0: 2 ports detected
[ 0.849470] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.849477] uhci_hcd 0000:05:01.0: UHCI Host Controller
[ 0.849514] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 10
[ 0.849532] uhci_hcd 0000:05:01.0: irq 19, io base 0x0000d000
[ 0.849620] hub 10-0:1.0: USB hub found
[ 0.849623] hub 10-0:1.0: 2 ports detected
[ 0.849673] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.849680] uhci_hcd 0000:05:01.1: UHCI Host Controller
[ 0.849715] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 11
[ 0.849733] uhci_hcd 0000:05:01.1: irq 18, io base 0x0000d100
[ 0.849830] hub 11-0:1.0: USB hub found
[ 0.849833] hub 11-0:1.0: 2 ports detected
[ 0.849928] usbcore: registered new interface driver libusual
[ 0.849955] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.883176] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.883177] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.116031] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.116062] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.132089] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.132201] mousedev: PS/2 mouse device common for all mice
[ 1.132308] rtc_cmos 00:04: RTC can wake from S4
[ 1.132388] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.132409] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.132463] device-mapper: uevent: version 1.0.3
[ 1.132515] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.132520] cpuidle: using governor ladder
[ 1.132522] cpuidle: using governor menu
[ 1.132523] EFI Variables Facility v0.08 2004-May-17
[ 1.132694] TCP cubic registered
[ 1.132774] NET: Registered protocol family 10
[ 1.133109] NET: Registered protocol family 17
[ 1.133112] Registering the dns_resolver key type
[ 1.133202] PM: Hibernation image not present or could not be loaded.
[ 1.133210] registered taskstats version 1
[ 1.138971] Magic number: 10:469:925
[ 1.139056] rtc_cmos 00:04: setting system clock to 2014-08-11 07:54:01 UTC (1407743641)
[ 1.139086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.139087] EDD information not available.
[ 1.240015] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 1.272021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.322333] ata1.00: HPA detected: current 312579695, native 312581808
[ 1.322339] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.322342] ata1.00: 312579695 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.373765] hub 1-2:1.0: USB hub found
[ 1.374103] hub 1-2:1.0: 4 ports detected
[ 1.380638] ata1.00: configured for UDMA/133
[ 1.380768] scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 1.380883] sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.380924] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.380937] sd 0:0:0:0: [sda] Write Protect is off
[ 1.380939] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.380960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.416012] Refined TSC clocksource calibration: 2999.999 MHz.
[ 1.416017] Switching to clocksource tsc
[ 1.429046] sda: sda1 sda2
[ 1.429303] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.484012] usb 3-4: new high-speed USB device number 2 using ehci_hcd
[ 1.620104] Initializing USB Mass Storage driver...
[ 1.620255] scsi8 : usb-storage 3-4:1.0
[ 1.620307] usbcore: registered new interface driver usb-storage
[ 1.620309] USB Mass Storage support registered.
[ 1.856013] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.872016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.917410] ata2.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.917413] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.036375] hub 4-1:1.0: USB hub found
[ 2.038335] hub 4-1:1.0: 3 ports detected
[ 2.050675] ata2.00: configured for UDMA/133
[ 2.050757] scsi 1:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 2.050873] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.050918] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.050928] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.050931] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.050957] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.116227] usb 1-2.1: new high-speed USB device number 4 using ehci_hcd
[ 2.133408] sdb: sdb1 sdb2 sdb3
[ 2.133686] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.209635] hub 1-2.1:1.0: USB hub found
[ 2.209977] hub 1-2.1:1.0: 4 ports detected
[ 2.284355] usb 1-2.2: new low-speed USB device number 5 using ehci_hcd
[ 2.456230] usb 1-2.4: new low-speed USB device number 6 using ehci_hcd
[ 2.540014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.575419] ata3.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 2.575423] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.620786] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.621287] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.621910] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.622535] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.623062] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2.623177] sd 8:0:0:1: Attached scsi generic sg3 type 0
[ 2.623291] sd 8:0:0:2: Attached scsi generic sg4 type 0
[ 2.623421] sd 8:0:0:3: Attached scsi generic sg5 type 0
[ 2.629276] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 2.629334] usb 4-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.629902] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 2.630650] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 2.631403] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 2.642060] ata3.00: configured for UDMA/133
[ 2.642138] scsi 2:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 2.642277] sd 2:0:0:0: [sdg] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.642285] sd 2:0:0:0: Attached scsi generic sg6 type 0
[ 2.642327] sd 2:0:0:0: [sdg] Write Protect is off
[ 2.642329] sd 2:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 2.642353] sd 2:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.698417] sdg: sdg1
[ 2.698627] sd 2:0:0:0: [sdg] Attached SCSI disk
[ 2.841332] usb 4-1.2: new full-speed USB device number 4 using uhci_hcd
[ 3.065336] usb 4-1.3: new full-speed USB device number 5 using uhci_hcd
[ 3.132012] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.179559] ata4.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 3.179562] ata4.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.237867] ata4.00: configured for UDMA/133
[ 3.237943] scsi 3:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 3.238068] sd 3:0:0:0: [sdh] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.238077] sd 3:0:0:0: Attached scsi generic sg7 type 0
[ 3.238122] sd 3:0:0:0: [sdh] Write Protect is off
[ 3.238124] sd 3:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 3.238149] sd 3:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.285892] sdh: sdh1 sdh2
[ 3.286133] sd 3:0:0:0: [sdh] Attached SCSI disk
[ 3.288230] usb 1-2.1.2: new full-speed USB device number 7 using ehci_hcd
[ 3.460232] usb 1-2.1.4: new low-speed USB device number 8 using ehci_hcd
[ 3.728012] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.728439] ata5.00: ATAPI: ATAPI iHES212 3, JL02, max UDMA/100
[ 3.728989] ata5.00: configured for UDMA/100
[ 3.730096] scsi 4:0:0:0: CD-ROM ATAPI iHES212 3 JL02 PQ: 0 ANSI: 5
[ 3.732800] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.732804] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.732910] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.732990] sr 4:0:0:0: Attached scsi generic sg8 type 5
[ 4.224012] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.224610] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 4.225502] ata6.00: configured for UDMA/100
[ 4.226458] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 4.229456] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.229568] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 4.229648] sr 5:0:0:0: Attached scsi generic sg9 type 5
[ 4.230934] Freeing unused kernel memory: 924k freed
[ 4.231113] Write protecting the kernel read-only data: 12288k
[ 4.235211] Freeing unused kernel memory: 1580k freed
[ 4.238535] Freeing unused kernel memory: 1184k freed
[ 4.252024] udevd[121]: starting version 175
[ 4.284230] input: Broadcom Corp ANYCOM Bluetooth USB-250 UHE as /devices/pci0000:00/0000:00:1a.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input2
[ 4.286066] generic-usb 0003:0A5C:4502.0004: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp ANYCOM Bluetooth USB-250 UHE] on usb-0000:00:1a.0-1.2/input0
[ 4.289443] input: Broadcom Corp ANYCOM Bluetooth USB-250 UHE as /devices/pci0000:00/0000:00:1a.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input3
[ 4.289549] generic-usb 0003:0A5C:4503.0005: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp ANYCOM Bluetooth USB-250 UHE] on usb-0000:00:1a.0-1.3/input0
[ 4.290948] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.290984] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 4.291652] scsi9 : pata_jmicron
[ 4.291727] scsi10 : pata_jmicron
[ 4.292094] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 4.292096] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 4.292548] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/input/input4
[ 4.292643] generic-usb 0003:046D:C408.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.7-2.1.4/input0
[ 4.292657] usbcore: registered new interface driver usbhid
[ 4.292659] usbhid: USB HID core driver
[ 4.294776] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.294791] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.294818] r8169 0000:04:00.0: setting latency timer to 64
[ 4.294882] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 4.295455] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c6a000, 00:1a:4d:55:99:60, XID 18000000 IRQ 45
[ 4.295458] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 4.315246] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4:1.0/input/input5
[ 4.315346] logitech 0003:046D:C517.0002: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-2.4/input0
[ 4.321108] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor
[ 4.321728] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input6
[ 4.321913] logitech 0003:046D:C517.0003: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-2.4/input1
[ 4.322163] input: THRUSTMASTER FireStorm Dual Power as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input7
[ 4.322221] thrustmaster 0003:044F:B300.0001: input,hidraw5: USB HID v1.10 Gamepad [THRUSTMASTER FireStorm Dual Power] on usb-0000:00:1a.7-2.2/input0
[ 4.322225] thrustmaster 0003:044F:B300.0001: force feedback for ThrustMaster devices by Zinx Verituse
[ 4.617123] firewire_ohci 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.672053] firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.172095] firewire_core: created device fw0: GUID 8effffff600020ed, S400
[ 6.107243] kjournald starting. Commit interval 5 seconds
[ 6.107290] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 24.035261] Adding 1951892k swap on /dev/sdb2. Priority:-1 extents:1 across:1951892k
[ 24.200418] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.217235] udevd[622]: starting version 175
[ 24.257194] lp: driver loaded but no devices found
[ 24.261299] it87: Found IT8718F chip at 0x290, revision 4
[ 24.261306] it87: VID is disabled (pins used for GPIO)
[ 24.261315] it87: Beeping is supported
[ 24.290533] parport_pc 00:08: reported by Plug and Play ACPI
[ 24.290580] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 24.296708] cfg80211: Calling CRDA to update world regulatory domain
[ 24.299458] nvidia: module license 'NVIDIA' taints kernel.
[ 24.299461] Disabling lock debugging due to kernel taint
[ 24.308892] rt61pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 24.318711] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318716] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318718] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318720] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318722] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318724] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318726] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318727] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318731] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318733] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318735] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318737] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318739] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318741] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318743] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318745] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318746] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318748] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318750] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318752] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318754] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318756] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318758] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318760] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 24.318761] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 24.318764] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 24.351820] type=1400 audit(1407743664.706:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=800 comm="apparmor_parser"
[ 24.352114] type=1400 audit(1407743664.710:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser"
[ 24.352277] type=1400 audit(1407743664.710:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser"
[ 24.380099] lp0: using parport0 (interrupt-driven).
[ 24.386827] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.387227] Registered led device: rt61pci-phy0::radio
[ 24.387243] Registered led device: rt61pci-phy0::assoc
[ 24.451360] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 24.451406] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 24.451426] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 24.451944] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.451955] nvidia 0000:01:00.0: setting latency timer to 64
[ 24.451959] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.452856] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
[ 24.457879] ppdev: user-space parallel port driver
[ 24.460483] Bluetooth: Core ver 2.16
[ 24.460500] NET: Registered protocol family 31
[ 24.460502] Bluetooth: HCI device and connection manager initialized
[ 24.460504] Bluetooth: HCI socket layer initialized
[ 24.460505] Bluetooth: L2CAP socket layer initialized
[ 24.460510] Bluetooth: SCO socket layer initialized
[ 24.460716] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 24.470493] usbcore: registered new interface driver btusb
[ 24.473565] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473568] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473570] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473572] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473574] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473576] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473578] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473580] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473581] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473585] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473587] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473589] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473592] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473595] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473596] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473598] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473600] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473602] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473604] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473606] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473608] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473610] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.473611] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473613] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.473615] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 24.473617] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.473620] cfg80211: World regulatory domain updated:
[ 24.473621] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.473623] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473625] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.473627] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.473629] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.473631] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.490371] hda_codec: ALC889A: BIOS auto-probing.
[ 24.504975] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.505829] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.506142] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.506219] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 24.506333] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 24.506445] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 24.509351] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 24.509442] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 24.595341] usb 4-1.2: USB disconnect, device number 4
[ 24.696295] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 24.696312] usbcore: registered new interface driver usblp
[ 24.818342] usb 4-1.3: USB disconnect, device number 5
[ 25.308565] init: udev-fallback-graphics main process (1262) terminated with status 1
[ 26.310526] EXT3-fs (sda2): using internal journal
[ 26.706372] kjournald starting. Commit interval 5 seconds
[ 26.706716] EXT3-fs (sdg1): using internal journal
[ 26.706721] EXT3-fs (sdg1): mounted filesystem with ordered data mode
[ 26.731447] kjournald starting. Commit interval 5 seconds
[ 26.731621] EXT3-fs (sdh1): using internal journal
[ 26.731625] EXT3-fs (sdh1): mounted filesystem with ordered data mode
[ 26.906337] kjournald starting. Commit interval 5 seconds
[ 26.906619] EXT3-fs (sda1): using internal journal
[ 26.906624] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 27.407614] kjournald starting. Commit interval 5 seconds
[ 27.478533] EXT3-fs (sdb1): using internal journal
[ 27.478538] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 27.529463] kjournald starting. Commit interval 5 seconds
[ 27.529663] EXT3-fs (sdh2): using internal journal
[ 27.529668] EXT3-fs (sdh2): mounted filesystem with ordered data mode
[ 27.790813] kjournald starting. Commit interval 5 seconds
[ 27.791000] EXT3-fs (sdb3): using internal journal
[ 27.791004] EXT3-fs (sdb3): mounted filesystem with ordered data mode
[ 27.815156] init: failsafe main process (1396) killed by TERM signal
[ 27.948575] type=1400 audit(1407743668.306:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1472 comm="apparmor_parser"
[ 27.948790] type=1400 audit(1407743668.306:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1474 comm="apparmor_parser"
[ 27.949087] type=1400 audit(1407743668.306:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1473 comm="apparmor_parser"
[ 27.949094] type=1400 audit(1407743668.306:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1474 comm="apparmor_parser"
[ 27.949261] type=1400 audit(1407743668.306:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1474 comm="apparmor_parser"
[ 27.949330] type=1400 audit(1407743668.306:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1473 comm="apparmor_parser"
[ 27.950737] type=1400 audit(1407743668.306:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1477 comm="apparmor_parser"
[ 28.033949] Bluetooth: RFCOMM TTY layer initialized
[ 28.033953] Bluetooth: RFCOMM socket layer initialized
[ 28.033955] Bluetooth: RFCOMM ver 1.11
[ 28.034750] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.034752] Bluetooth: BNEP filters: protocol multicast
[ 28.188167] r8169 0000:04:00.0: eth0: link down
[ 28.188174] r8169 0000:04:00.0: eth0: link down
[ 28.188782] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.188960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.189855] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.250456] init: gdm main process (1620) killed by TERM signal
[ 28.437724] Bridge firewalling registered
[ 28.491398] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.511646] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.560852] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 29.843974] r8169 0000:04:00.0: eth0: link up
[ 29.844630] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.105472] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 30.615109] Ebtables v2.0 registered
[ 30.621140] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 36.637041] CIFS: Unknown mount option cache
[ 36.656211] CIFS: Unknown mount option cache
[ 36.745671] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[ 41.004007] eth0: no IPv6 routers present
[ 41.208644] postgres (2096): /proc/2096/oom_adj is deprecated, please use /proc/2096/oom_score_adj instead.
[ 45.531881] vboxdrv: Found 4 processor cores.
[ 45.532057] vboxdrv: fAsync=0 offMin=0x4e3 offMax=0x6e1c
[ 45.532125] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 45.532126] vboxdrv: Successfully loaded version 4.1.26 (interface 0x00190000).
[ 45.738699] vboxpci: IOMMU not found (not registered)
[ 48.140985] init: plymouth-stop pre-start process (2765) terminated with status 1
[ 381.735591] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[ 381.735840] usb 1-2.1.2: USB disconnect, device number 7
[ 381.735953] usblp0: removed
[ 381.936347] usb 1-2.1.2: new full-speed USB device number 9 using ehci_hcd
[ 382.039752] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 383.508436] usblp0: removed
[ 383.519276] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 406.417984] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 408.902192] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 408.902622] ISOFS: changing to secondary root
[11646.218735] PM: Syncing filesystems ... done.
[11646.285505] PM: Preparing system for mem sleep
[11646.285516] Freezing user space processes ... (elapsed 0.01 seconds) done.
[11646.300026] Freezing remaining freezable tasks ... (elapsed 3.99 seconds) done.
[11650.300019] PM: Entering mem sleep
[11650.300032] Suspending console(s) (use no_console_suspend to debug)
[11650.300497] sd 3:0:0:0: [sdh] Synchronizing SCSI cache
[11650.300560] sd 3:0:0:0: [sdh] Stopping disk
[11650.300563] sd 2:0:0:0: [sdg] Synchronizing SCSI cache
[11650.301702] sd 2:0:0:0: [sdg] Stopping disk
[11650.303880] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[11650.303933] sd 1:0:0:0: [sdb] Stopping disk
[11650.304055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11650.304105] sd 0:0:0:0: [sda] Stopping disk
[11650.304534] parport_pc 00:08: disabled
[11650.304607] serial 00:07: disabled
[11650.304623] serial 00:07: wake-up capability disabled by ACPI
[11650.304688] ACPI handle has no context!
[11650.304862] pata_jmicron 0000:03:00.1: PCI INT B disabled
[11650.304951] ahci 0000:03:00.0: PCI INT A disabled
[11650.336022] ehci_hcd 0000:05:01.2: PCI INT C disabled
[11650.336078] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[11650.344050] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[11650.344052] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[11650.344062] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[11650.344084] uhci_hcd 0000:05:01.1: PCI INT B disabled
[11650.344095] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[11650.344113] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[11650.344135] uhci_hcd 0000:05:01.0: PCI INT A disabled
[11650.348020] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[11650.364011] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[11650.408085] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[11650.424011] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.972 msecs
[11651.904009] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 1 (-16).
[11651.904037] rt61pci 0000:05:00.0: PCI INT A disabled
[11651.904043] ACPI handle has no context!
[11651.920011] PM: suspend of drv:rt61pci dev:0000:05:00.0 complete after 1615.283 msecs
[11651.920022] PM: suspend of drv:pci dev:0000:00:1e.0 complete after 1615.091 msecs
[11651.920033] PM: suspend of drv: dev:pci0000:00 complete after 1614.886 msecs
[11651.920043] PM: suspend of devices complete after 1619.704 msecs
[11651.920046] PM: suspend devices took 1.620 seconds
[11651.920266] ehci_hcd 0000:05:01.2: PME# enabled
[11651.920271] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[11651.936035] uhci_hcd 0000:05:01.1: PME# enabled
[11651.936037] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[11651.952033] uhci_hcd 0000:05:01.0: PME# enabled
[11651.952035] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[11651.968062] r8169 0000:04:00.0: PME# enabled
[11651.968068] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[11651.984130] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[11652.000032] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[11652.000056] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[11652.000079] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[11652.000106] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[11652.016032] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[11652.016056] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[11652.016079] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[11652.016108] PM: late suspend of devices complete after 96.059 msecs
[11652.016919] ACPI: Preparing to enter system sleep state S3
[11652.020429] PM: Saving platform NVS memory
[11652.020476] Disabling non-boot CPUs ...
[11652.124010] CPU 1 is now offline
[11652.228009] CPU 2 is now offline
[11652.228564] Broke affinity for irq 47
[11652.332007] CPU 3 is now offline
[11652.332252] ACPI: Low-level resume complete
[11652.332252] PM: Restoring platform NVS memory
[11652.332252] Enabling non-boot CPUs ...
[11652.332252] Booting Node 0 Processor 1 APIC 0x1
[11652.332252] smpboot cpu 1: start_ip = 98000
[11652.021955] Calibrating delay loop (skipped) already calibrated this CPU
[11652.363697] NMI watchdog enabled, takes one hw-pmu counter.
[11652.364033] CPU1 is up
[11652.364111] Booting Node 0 Processor 2 APIC 0x3
[11652.364113] smpboot cpu 2: start_ip = 98000
[11652.125823] Calibrating delay loop (skipped) already calibrated this CPU
[11652.395530] NMI watchdog enabled, takes one hw-pmu counter.
[11652.396043] CPU2 is up
[11652.396122] Booting Node 0 Processor 3 APIC 0x2
[11652.396124] smpboot cpu 3: start_ip = 98000
[11652.229569] Calibrating delay loop (skipped) already calibrated this CPU
[11652.427666] NMI watchdog enabled, takes one hw-pmu counter.
[11652.428038] CPU3 is up
[11652.433288] ACPI: Waking up from system sleep state S3
[11652.435242] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[11652.435267] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[11652.435290] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[11652.435315] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[11652.435328] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[11652.435332] ehci_hcd 0000:00:1a.7: PME# disabled
[11652.435342] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10e)
[11652.435353] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa200004)
[11652.435356] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[11652.435360] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[11652.435383] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20009090, writing 0x9090)
[11652.435413] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[11652.435419] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xfa71fa61)
[11652.435423] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfa00fa00)
[11652.435426] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0xb0b0)
[11652.435431] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[11652.435435] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[11652.435461] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[11652.435467] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xfa51fa31)
[11652.435470] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
[11652.435474] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0f0, writing 0xc0c0)
[11652.435479] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[11652.435483] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[11652.435523] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[11652.435546] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[11652.435569] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[11652.435594] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[11652.435606] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[11652.435610] ehci_hcd 0000:00:1d.7: PME# disabled
[11652.435670] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xea01)
[11652.435714] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[11652.435720] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xa001)
[11652.435723] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[11652.435727] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[11652.435730] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[11652.435734] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11652.435771] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[11652.435792] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[11652.435828] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[11652.435842] pata_jmicron 0000:03:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xb401)
[11652.435847] pata_jmicron 0000:03:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xb301)
[11652.435851] pata_jmicron 0000:03:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xb201)
[11652.435856] pata_jmicron 0000:03:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xb101)
[11652.435861] pata_jmicron 0000:03:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xb001)
[11652.435866] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[11652.435872] pata_jmicron 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11652.435904] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[11652.435921] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf9000004)
[11652.435927] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xc001)
[11652.435931] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[11652.435937] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[11652.435981] rt61pci 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10c)
[11652.436023] rt61pci 0000:05:00.0: restoring config space at offset 0x4 (was 0xffff8000, writing 0xfa100000)
[11652.436027] rt61pci 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[11652.436032] rt61pci 0000:05:00.0: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100017)
[11652.452013] uhci_hcd 0000:05:01.0: BAR 4: set to [io 0xd000-0xd01f] (PCI address [0xd000-0xd01f])
[11652.452021] uhci_hcd 0000:05:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[11652.452037] uhci_hcd 0000:05:01.0: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[11652.452043] uhci_hcd 0000:05:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[11652.452053] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[11652.452057] uhci_hcd 0000:05:01.0: PME# disabled
[11652.468014] uhci_hcd 0000:05:01.1: BAR 4: set to [io 0xd100-0xd11f] (PCI address [0xd100-0xd11f])
[11652.468023] uhci_hcd 0000:05:01.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[11652.468039] uhci_hcd 0000:05:01.1: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[11652.468045] uhci_hcd 0000:05:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[11652.468054] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[11652.468059] uhci_hcd 0000:05:01.1: PME# disabled
[11652.484009] pci_raw_set_power_state: 48 callbacks suppressed
[11652.484012] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[11652.484019] ehci_hcd 0000:05:01.2: restoring config space at offset 0xf (was 0xffffffff, writing 0x30b)
[11652.484024] ehci_hcd 0000:05:01.2: restoring config space at offset 0xe (was 0xffffffff, writing 0x0)
[11652.484029] ehci_hcd 0000:05:01.2: restoring config space at offset 0xd (was 0xffffffff, writing 0x80)
[11652.484033] ehci_hcd 0000:05:01.2: restoring config space at offset 0xc (was 0xffffffff, writing 0x0)
[11652.484038] ehci_hcd 0000:05:01.2: restoring config space at offset 0xb (was 0xffffffff, writing 0x31041106)
[11652.484043] ehci_hcd 0000:05:01.2: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[11652.484048] ehci_hcd 0000:05:01.2: restoring config space at offset 0x9 (was 0xffffffff, writing 0x0)
[11652.484053] ehci_hcd 0000:05:01.2: restoring config space at offset 0x8 (was 0xffffffff, writing 0x0)
[11652.484057] ehci_hcd 0000:05:01.2: restoring config space at offset 0x7 (was 0xffffffff, writing 0x0)
[11652.484062] ehci_hcd 0000:05:01.2: restoring config space at offset 0x6 (was 0xffffffff, writing 0x0)
[11652.484067] ehci_hcd 0000:05:01.2: restoring config space at offset 0x5 (was 0xffffffff, writing 0x0)
[11652.484071] ehci_hcd 0000:05:01.2: restoring config space at offset 0x4 (was 0xffffffff, writing 0xfa10d000)
[11652.484076] ehci_hcd 0000:05:01.2: restoring config space at offset 0x3 (was 0xffffffff, writing 0x802008)
[11652.484081] ehci_hcd 0000:05:01.2: restoring config space at offset 0x2 (was 0xffffffff, writing 0xc032065)
[11652.484086] ehci_hcd 0000:05:01.2: restoring config space at offset 0x1 (was 0xffffffff, writing 0x2100013)
[11652.484091] ehci_hcd 0000:05:01.2: restoring config space at offset 0x0 (was 0xffffffff, writing 0x31041106)
[11652.484102] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[11652.484107] ehci_hcd 0000:05:01.2: PME# disabled
[11652.500009] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[11652.500020] firewire_ohci 0000:05:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
[11652.500035] firewire_ohci 0000:05:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfa108000)
[11652.500039] firewire_ohci 0000:05:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfa10c000)
[11652.500044] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[11652.500050] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[11652.500291] PM: early resume of devices complete after 65.137 msecs
[11652.500358] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[11652.500365] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[11652.500387] usb usb4: root hub lost power or was reset
[11652.500397] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[11652.500406] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[11652.500427] usb usb5: root hub lost power or was reset
[11652.500454] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[11652.500461] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[11652.500489] usb usb6: root hub lost power or was reset
[11652.504030] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[11652.504037] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[11652.504069] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[11652.504073] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11652.504075] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[11652.504082] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[11652.504097] usb usb7: root hub lost power or was reset
[11652.504104] usb usb8: root hub lost power or was reset
[11652.504123] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[11652.504126] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[11652.504135] pci 0000:00:1e.0: setting latency timer to 64
[11652.504142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[11652.504149] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[11652.504157] rt61pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[11652.504164] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[11652.504177] usb usb9: root hub lost power or was reset
[11652.504202] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[11652.504207] usb usb10: root hub lost power or was reset
[11652.504232] usb usb11: root hub lost power or was reset
[11652.504256] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[11652.504262] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[11652.504292] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[11652.504322] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[11652.504327] r8169 0000:04:00.0: PME# disabled
[11652.504333] ahci 0000:00:1f.2: setting latency timer to 64
[11652.504414] sd 2:0:0:0: [sdg] Starting disk
[11652.504421] sd 1:0:0:0: [sdb] Starting disk
[11652.504447] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[11652.504455] ahci 0000:03:00.0: setting latency timer to 64
[11652.504469] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[11652.504477] pata_jmicron 0000:03:00.1: setting latency timer to 64
[11652.504844] serial 00:07: activated
[11652.505178] parport_pc 00:08: activated
[11652.505864] sd 0:0:0:0: [sda] Starting disk
[11652.505880] sd 3:0:0:0: [sdh] Starting disk
[11652.520019] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[11652.520023] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[11652.520054] usb usb3: root hub lost power or was reset
[11652.520065] ehci_hcd 0000:05:01.2: cache line size of 32 is not supported
[11652.590131] firewire_core: skipped bus generations, destroying all nodes
[11652.605361] PM: resume of drv:usbhid dev:1-2.2:1.0 complete after 103.883 msecs
[11652.605372] PM: resume of drv: dev:ep_00 complete after 103.864 msecs
[11652.605378] PM: resume of drv: dev:ep_81 complete after 103.883 msecs
[11652.605633] PM: resume of drv:usbhid dev:1-2.4:1.0 complete after 104.098 msecs
[11652.605635] PM: resume of drv: dev:ep_00 complete after 104.050 msecs
[11652.605639] PM: resume of drv:usbhid dev:1-2.4:1.1 complete after 104.081 msecs
[11652.605648] PM: resume of drv: dev:ep_81 complete after 104.101 msecs
[11652.605650] PM: resume of drv: dev:ep_82 complete after 104.078 msecs
[11652.620039] PM: resume of drv:hub dev:5-0:1.0 complete after 119.253 msecs
[11652.620045] PM: resume of drv: dev:ep_00 complete after 119.230 msecs
[11652.620055] PM: resume of drv: dev:ep_81 complete after 119.254 msecs
[11652.620058] PM: resume of drv:hub dev:6-0:1.0 complete after 119.212 msecs
[11652.620060] PM: resume of drv: dev:ep_00 complete after 119.191 msecs
[11652.620066] PM: resume of drv: dev:ep_81 complete after 119.208 msecs
[11652.624047] PM: resume of drv: dev:ep_00 complete after 123.129 msecs
[11652.624051] PM: resume of drv:hub dev:7-0:1.0 complete after 123.157 msecs
[11652.624058] PM: resume of drv:hub dev:9-0:1.0 complete after 123.060 msecs
[11652.624059] PM: resume of drv: dev:ep_00 complete after 123.035 msecs
[11652.624063] PM: resume of drv: dev:ep_81 complete after 123.157 msecs
[11652.624065] PM: resume of drv:hub dev:8-0:1.0 complete after 123.122 msecs
[11652.624067] PM: resume of drv: dev:ep_00 complete after 123.102 msecs
[11652.624070] PM: resume of drv: dev:ep_81 complete after 123.059 msecs
[11652.624072] PM: resume of drv: dev:ep_81 complete after 123.118 msecs
[11652.660039] PM: resume of drv: dev:ep_00 complete after 158.598 msecs
[11652.660043] PM: resume of drv:hub dev:1-2.1:1.0 complete after 158.626 msecs
[11652.660048] PM: resume of drv: dev:ep_81 complete after 158.620 msecs
[11652.664730] PM: resume of drv:usblp dev:1-2.1.2:1.0 complete after 162.553 msecs
[11652.664736] PM: resume of drv: dev:ep_00 complete after 162.522 msecs
[11652.671831] PM: resume of drv: dev:ep_82 complete after 169.629 msecs
[11652.671835] PM: resume of drv: dev:ep_01 complete after 169.646 msecs
[11652.712862] PM: resume of drv:usbhid dev:1-2.1.4:1.0 complete after 210.849 msecs
[11652.712867] PM: resume of drv: dev:ep_00 complete after 210.831 msecs
[11652.712870] PM: resume of drv: dev:ep_81 complete after 210.844 msecs
[11652.724021] PM: resume of drv: dev:ep_00 complete after 223.276 msecs
[11652.724029] PM: resume of drv:hub dev:4-0:1.0 complete after 223.330 msecs
[11652.724036] PM: resume of drv: dev:ep_81 complete after 223.330 msecs
[11652.728043] PM: resume of drv:hub dev:10-0:1.0 complete after 226.997 msecs
[11652.728046] PM: resume of drv: dev:ep_00 complete after 226.978 msecs
[11652.728049] PM: resume of drv: dev:ep_81 complete after 226.992 msecs
[11652.728051] PM: resume of drv:hub dev:11-0:1.0 complete after 226.957 msecs
[11652.728057] PM: resume of drv: dev:ep_00 complete after 226.941 msecs
[11652.728059] PM: resume of drv: dev:ep_81 complete after 226.954 msecs
[11652.756026] PM: resume of drv:hub dev:3-0:1.0 complete after 255.356 msecs
[11652.756033] PM: resume of drv: dev:ep_00 complete after 255.345 msecs
[11652.756037] PM: resume of drv: dev:ep_81 complete after 255.365 msecs
[11652.756053] ehci_hcd 0000:05:01.2: port 4 resume error -19
[11652.756066] pm_op(): usb_dev_resume+0x0/0x20 returns -32
[11652.756071] PM: Device 3-4 failed to resume async: error -32
[11652.756073] PM: resume of drv:usb-storage dev:3-4:1.0 complete after 254.827 msecs
[11652.756082] PM: resume of drv: dev:ep_82 complete after 254.811 msecs
[11652.756084] PM: resume of drv: dev:ep_00 complete after 254.798 msecs
[11652.756091] PM: resume of drv: dev:ep_01 complete after 254.832 msecs
[11652.756093] PM: resume of drv:scsi dev:host8 complete after 254.793 msecs
[11652.756099] PM: resume of drv:scsi_host dev:host8 complete after 254.789 msecs
[11652.756101] PM: resume of drv:scsi dev:target8:0:0 complete after 254.504 msecs
[11652.756114] PM: resume of drv:sd dev:8:0:0:0 complete after 254.506 msecs
[11652.756120] PM: resume of drv:sd dev:8:0:0:2 complete after 254.462 msecs
[11652.756125] PM: resume of drv:sd dev:8:0:0:3 complete after 254.426 msecs
[11652.756132] PM: resume of drv:sd dev:8:0:0:1 complete after 254.488 msecs
[11652.756134] PM: resume of drv:scsi_device dev:8:0:0:0 complete after 254.506 msecs
[11652.756140] PM: resume of drv:scsi_device dev:8:0:0:3 complete after 254.430 msecs
[11652.756146] PM: resume of drv:scsi_device dev:8:0:0:2 complete after 254.470 msecs
[11652.756151] PM: resume of drv:scsi_device dev:8:0:0:1 complete after 254.505 msecs
[11652.836026] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[11652.839699] ehci_hcd 0000:05:01.2: HC died; cleaning up
[11652.840038] ata8: SATA link down (SStatus 0 SControl 300)
[11652.840079] ata7: SATA link down (SStatus 0 SControl 300)
[11652.854099] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 353.722 msecs
[11652.894560] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 394.108 msecs
[11653.000016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11653.008016] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11653.008990] ata5.00: configured for UDMA/100
[11653.056997] ata6.00: configured for UDMA/100
[11653.088032] firewire_core: rediscovered device fw0
[11653.200024] PM: resume of drv:hub dev:4-1:1.0 complete after 698.687 msecs
[11653.200033] PM: resume of drv: dev:ep_00 complete after 698.674 msecs
[11653.200040] PM: resume of drv: dev:ep_81 complete after 698.686 msecs
[11653.273716] usb 4-1.1: reset full-speed USB device number 3 using uhci_hcd
[11653.383708] btusb 4-1.1:1.0: no reset_resume for driver btusb?
[11653.383711] btusb 4-1.1:1.1: no reset_resume for driver btusb?
[11653.632130] PM: resume of drv:usb dev:4-1.1:1.1 complete after 1130.270 msecs
[11653.632134] PM: resume of drv:usb dev:4-1.1:1.3 complete after 1130.197 msecs
[11653.632141] PM: resume of drv:usb dev:4-1.1:1.0 complete after 1130.342 msecs
[11653.632147] PM: resume of drv: dev:ep_83 complete after 1130.265 msecs
[11653.632151] PM: resume of drv: dev:ep_00 complete after 1130.202 msecs
[11653.632157] PM: resume of drv: dev:ep_82 complete after 1130.332 msecs
[11653.632162] PM: resume of drv:usb dev:4-1.1:1.2 complete after 1130.259 msecs
[11653.632166] PM: resume of drv: dev:ep_02 complete after 1130.323 msecs
[11653.632183] PM: resume of drv: dev:ep_81 complete after 1130.376 msecs
[11653.632185] PM: resume of drv: dev:ep_03 complete after 1130.299 msecs
[11653.632189] PM: resume of drv: dev:ep_84 complete after 1130.278 msecs
[11653.632193] PM: resume of drv: dev:ep_04 complete after 1130.269 msecs
[11655.192023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11655.308016] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11655.312014] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11655.348014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11655.380969] ata2.00: configured for UDMA/133
[11655.413280] ata4.00: configured for UDMA/133
[11655.419463] ata3.00: configured for UDMA/133
[11655.451870] ata1.00: configured for UDMA/133
[11655.453894] PM: resume of drv:sd dev:1:0:0:0 complete after 2952.510 msecs
[11655.453904] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 2952.508 msecs
[11655.477875] PM: resume of drv:sd dev:3:0:0:0 complete after 2975.899 msecs
[11655.477886] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 2975.899 msecs
[11655.492391] PM: resume of drv:sd dev:2:0:0:0 complete after 2990.645 msecs
[11655.492400] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2990.636 msecs
[11655.516472] PM: resume of drv:sd dev:0:0:0:0 complete after 3015.283 msecs
[11655.516482] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3015.274 msecs
[11655.516488] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2993.111 msecs
[11655.516702] PM: resume of devices complete after 3016.384 msecs
[11655.517033] PM: resume devices took 3.016 seconds
[11655.517079] PM: Finishing wakeup.
[11655.517080] Restarting tasks ... done.
[11655.528856] usb 1-2.1.2: USB disconnect, device number 9
[11655.528949] usblp0: removed
[11655.732242] usb 1-2.1.2: new full-speed USB device number 10 using ehci_hcd
[11655.836290] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[11655.836334] usb 3-4: USB disconnect, device number 2
[11656.075906] r8169 0000:04:00.0: eth0: link down
[11656.075915] r8169 0000:04:00.0: eth0: link down
[11656.076698] ADDRCONF(NETDEV_UP): eth0: link is not ready
[11657.111924] usblp0: removed
[11657.123431] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[11657.731665] r8169 0000:04:00.0: eth0: link up
[11657.732349] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[11659.749670] VFS: busy inodes on changed media or resized disk sr0
[11668.016005] eth0: no IPv6 routers present
[19896.221192] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[19896.221440] usb 1-2.1.2: USB disconnect, device number 10
[19896.221551] usblp0: removed
[19896.420319] usb 1-2.1.2: new full-speed USB device number 11 using ehci_hcd
[19896.523805] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[19897.850498] usblp0: removed
[19897.861604] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[28318.111698] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[28318.111946] usb 1-2.1.2: USB disconnect, device number 11
[28318.112100] usblp0: removed
[28318.312331] usb 1-2.1.2: new full-speed USB device number 12 using ehci_hcd
[28318.415996] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[28319.742002] usblp0: removed
[28319.752872] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[30379.936322] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[30379.936562] usb 1-2.1.2: USB disconnect, device number 12
[30379.936685] usblp0: removed
[30380.136319] usb 1-2.1.2: new full-speed USB device number 13 using ehci_hcd
[30380.239988] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[30381.566446] usblp0: removed
[30381.579392] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[31739.040718] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[31739.040966] usb 1-2.1.2: USB disconnect, device number 13
[31739.041087] usblp0: removed
[31739.240224] usb 1-2.1.2: new full-speed USB device number 14 using ehci_hcd
[31739.343900] usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[31740.670767] usblp0: removed
[31740.683100] usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[34326.433614] usb 1-2.1.2: USB disconnect, device number 14
[34326.433737] usblp0: removed
[36642.506184] init: anacron main process (10807) killed by TERM signal
[36643.676843] PM: Syncing filesystems ... done.
[36643.752888] PM: Preparing system for mem sleep
[36643.752899] Freezing user space processes ... (elapsed 0.01 seconds) done.
[36643.768029] Freezing remaining freezable tasks ... (elapsed 2.22 seconds) done.
[36645.992021] PM: Entering mem sleep
[36645.992034] Suspending console(s) (use no_console_suspend to debug)
[36645.992476] sd 3:0:0:0: [sdh] Synchronizing SCSI cache
[36645.995831] sd 3:0:0:0: [sdh] Stopping disk
[36645.995918] sd 2:0:0:0: [sdg] Synchronizing SCSI cache
[36645.995989] sd 2:0:0:0: [sdg] Stopping disk
[36645.996053] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[36645.996070] parport_pc 00:08: disabled
[36645.996088] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36645.996101] sd 1:0:0:0: [sdb] Stopping disk
[36645.996121] sd 0:0:0:0: [sda] Stopping disk
[36645.996128] serial 00:07: disabled
[36645.996144] serial 00:07: wake-up capability disabled by ACPI
[36645.996619] ehci_hcd 0000:05:01.2: PCI INT C disabled
[36645.996626] ACPI handle has no context!
[36645.996870] pata_jmicron 0000:03:00.1: PCI INT B disabled
[36645.996910] ahci 0000:03:00.0: PCI INT A disabled
[36646.032079] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[36646.036061] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[36646.036075] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[36646.036081] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[36646.036086] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[36646.036108] uhci_hcd 0000:05:01.0: PCI INT A disabled
[36646.036112] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[36646.036128] uhci_hcd 0000:05:01.1: PCI INT B disabled
[36646.040012] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[36646.056012] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[36646.100074] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[36646.116011] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.956 msecs
[36647.596011] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 1 (-16).
[36647.596040] rt61pci 0000:05:00.0: PCI INT A disabled
[36647.596046] ACPI handle has no context!
[36647.612014] PM: suspend of drv:rt61pci dev:0000:05:00.0 complete after 1615.351 msecs
[36647.612027] PM: suspend of drv:pci dev:0000:00:1e.0 complete after 1615.089 msecs
[36647.612036] PM: suspend of drv: dev:pci0000:00 complete after 1614.847 msecs
[36647.612043] PM: suspend of devices complete after 1619.711 msecs
[36647.612046] PM: suspend devices took 1.620 seconds
[36647.616048] uhci_hcd 0000:05:01.1: PME# enabled
[36647.616059] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[36647.632036] uhci_hcd 0000:05:01.0: PME# enabled
[36647.632038] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[36647.648064] r8169 0000:04:00.0: PME# enabled
[36647.648070] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[36647.664137] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[36647.680035] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[36647.680059] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[36647.680083] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[36647.680201] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[36647.696032] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[36647.696056] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[36647.696080] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[36647.696146] PM: late suspend of devices complete after 84.097 msecs
[36647.696966] ACPI: Preparing to enter system sleep state S3
[36647.700443] PM: Saving platform NVS memory
[36647.700490] Disabling non-boot CPUs ...
[36647.804012] CPU 1 is now offline
[36647.908008] CPU 2 is now offline
[36648.012008] CPU 3 is now offline
[36648.012241] ACPI: Low-level resume complete
[36648.012241] PM: Restoring platform NVS memory
[36648.012241] Enabling non-boot CPUs ...
[36648.012241] Booting Node 0 Processor 1 APIC 0x1
[36648.012241] smpboot cpu 1: start_ip = 98000
[36647.701934] Calibrating delay loop (skipped) already calibrated this CPU
[36648.043656] NMI watchdog enabled, takes one hw-pmu counter.
[36648.044042] CPU1 is up
[36648.044117] Booting Node 0 Processor 2 APIC 0x3
[36648.044119] smpboot cpu 2: start_ip = 98000
[36647.805781] Calibrating delay loop (skipped) already calibrated this CPU
[36648.075478] NMI watchdog enabled, takes one hw-pmu counter.
[36648.076032] CPU2 is up
[36648.076112] Booting Node 0 Processor 3 APIC 0x2
[36648.076114] smpboot cpu 3: start_ip = 98000
[36647.909497] Calibrating delay loop (skipped) already calibrated this CPU
[36648.107588] NMI watchdog enabled, takes one hw-pmu counter.
[36648.108039] CPU3 is up
[36648.113264] ACPI: Waking up from system sleep state S3
[36648.115156] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[36648.115182] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[36648.115205] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[36648.115230] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[36648.115243] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[36648.115246] ehci_hcd 0000:00:1a.7: PME# disabled
[36648.115257] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10e)
[36648.115268] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa200004)
[36648.115271] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[36648.115275] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[36648.115325] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[36648.115332] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xfa71fa61)
[36648.115335] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfa00fa00)
[36648.115338] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x2000b0b0)
[36648.115344] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[36648.115347] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[36648.115373] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[36648.115380] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xfa51fa31)
[36648.115383] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
[36648.115386] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0f0, writing 0xc0c0)
[36648.115391] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[36648.115395] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[36648.115435] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[36648.115458] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[36648.115482] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[36648.115506] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[36648.115518] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[36648.115522] ehci_hcd 0000:00:1d.7: PME# disabled
[36648.115582] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xea01)
[36648.115626] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[36648.115632] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xa001)
[36648.115635] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[36648.115639] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[36648.115642] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[36648.115646] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[36648.115683] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[36648.115704] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[36648.115740] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[36648.115754] pata_jmicron 0000:03:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xb401)
[36648.115758] pata_jmicron 0000:03:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xb301)
[36648.115763] pata_jmicron 0000:03:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xb201)
[36648.115768] pata_jmicron 0000:03:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xb101)
[36648.115772] pata_jmicron 0000:03:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xb001)
[36648.115777] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[36648.115783] pata_jmicron 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[36648.115816] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[36648.115832] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf9000004)
[36648.115838] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xc001)
[36648.115842] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[36648.115848] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[36648.115892] rt61pci 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10c)
[36648.115905] rt61pci 0000:05:00.0: restoring config space at offset 0x4 (was 0xffff8000, writing 0xfa100000)
[36648.115909] rt61pci 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[36648.115914] rt61pci 0000:05:00.0: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100017)
[36648.128014] uhci_hcd 0000:05:01.0: BAR 4: set to [io 0xd000-0xd01f] (PCI address [0xd000-0xd01f])
[36648.128023] uhci_hcd 0000:05:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[36648.128039] uhci_hcd 0000:05:01.0: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[36648.128045] uhci_hcd 0000:05:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[36648.128054] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[36648.128059] uhci_hcd 0000:05:01.0: PME# disabled
[36648.144013] uhci_hcd 0000:05:01.1: BAR 4: set to [io 0xd100-0xd11f] (PCI address [0xd100-0xd11f])
[36648.144021] uhci_hcd 0000:05:01.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[36648.144037] uhci_hcd 0000:05:01.1: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[36648.144043] uhci_hcd 0000:05:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[36648.144056] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[36648.144060] uhci_hcd 0000:05:01.1: PME# disabled
[36648.160009] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[36648.176009] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[36648.176019] firewire_ohci 0000:05:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
[36648.176034] firewire_ohci 0000:05:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfa108000)
[36648.176039] firewire_ohci 0000:05:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfa10c000)
[36648.176044] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[36648.176050] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[36648.176276] PM: early resume of devices complete after 61.209 msecs
[36648.176324] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36648.176330] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[36648.176349] usb usb4: root hub lost power or was reset
[36648.176358] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[36648.176364] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[36648.176382] usb usb5: root hub lost power or was reset
[36648.176390] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[36648.176397] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[36648.176415] usb usb6: root hub lost power or was reset
[36648.176423] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[36648.176430] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[36648.176451] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[36648.176456] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[36648.176459] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[36648.176469] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[36648.176490] usb usb7: root hub lost power or was reset
[36648.176495] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[36648.176499] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[36648.176507] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[36648.176527] usb usb8: root hub lost power or was reset
[36648.176535] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[36648.176547] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[36648.176549] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[36648.176565] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[36648.176570] usb usb9: root hub lost power or was reset
[36648.176577] pci 0000:00:1e.0: setting latency timer to 64
[36648.176587] ahci 0000:00:1f.2: setting latency timer to 64
[36648.176592] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36648.176603] ahci 0000:03:00.0: setting latency timer to 64
[36648.176672] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[36648.176682] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[36648.176684] pata_jmicron 0000:03:00.1: setting latency timer to 64
[36648.176692] r8169 0000:04:00.0: PME# disabled
[36648.176702] rt61pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[36648.176715] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[36648.176747] usb usb10: root hub lost power or was reset
[36648.176758] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[36648.176785] usb usb11: root hub lost power or was reset
[36648.177367] serial 00:07: activated
[36648.177688] parport_pc 00:08: activated
[36648.178480] sd 0:0:0:0: [sda] Starting disk
[36648.178585] sd 1:0:0:0: [sdb] Starting disk
[36648.178821] sd 2:0:0:0: [sdg] Starting disk
[36648.179021] sd 3:0:0:0: [sdh] Starting disk
[36648.192022] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[36648.192027] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[36648.232100] firewire_core: skipped bus generations, destroying all nodes
[36648.296044] PM: resume of drv: dev:ep_00 complete after 117.798 msecs
[36648.296061] PM: resume of drv:hub dev:7-0:1.0 complete after 118.170 msecs
[36648.296068] PM: resume of drv: dev:ep_81 complete after 118.178 msecs
[36648.296075] PM: resume of drv:hub dev:9-0:1.0 complete after 117.785 msecs
[36648.296078] PM: resume of drv: dev:ep_00 complete after 117.797 msecs
[36648.296082] PM: resume of drv:hub dev:8-0:1.0 complete after 117.821 msecs
[36648.296110] PM: resume of drv: dev:ep_00 complete after 117.811 msecs
[36648.296114] PM: resume of drv: dev:ep_81 complete after 117.844 msecs
[36648.296122] PM: resume of drv: dev:ep_81 complete after 117.825 msecs
[36648.296124] PM: resume of drv: dev:ep_00 complete after 118.262 msecs
[36648.296134] PM: resume of drv:hub dev:5-0:1.0 complete after 118.276 msecs
[36648.296140] PM: resume of drv: dev:ep_00 complete after 118.262 msecs
[36648.296142] PM: resume of drv: dev:ep_81 complete after 118.281 msecs
[36648.296144] PM: resume of drv:hub dev:6-0:1.0 complete after 118.275 msecs
[36648.296156] PM: resume of drv: dev:ep_81 complete after 118.283 msecs
[36648.324858] PM: resume of drv:usbhid dev:1-2.2:1.0 complete after 146.167 msecs
[36648.324864] PM: resume of drv: dev:ep_00 complete after 146.132 msecs
[36648.324868] PM: resume of drv: dev:ep_81 complete after 146.158 msecs
[36648.325754] PM: resume of drv:usbhid dev:1-2.4:1.0 complete after 147.001 msecs
[36648.325759] PM: resume of drv:usbhid dev:1-2.4:1.1 complete after 146.979 msecs
[36648.325762] PM: resume of drv: dev:ep_81 complete after 146.994 msecs
[36648.325765] PM: resume of drv: dev:ep_00 complete after 146.959 msecs
[36648.325769] PM: resume of drv: dev:ep_82 complete after 146.976 msecs
[36648.326113] PM: resume of drv:hub dev:1-2.1:1.0 complete after 147.482 msecs
[36648.326118] PM: resume of drv: dev:ep_81 complete after 147.469 msecs
[36648.326120] PM: resume of drv: dev:ep_00 complete after 147.454 msecs
[36648.372738] PM: resume of drv:usbhid dev:1-2.1.4:1.0 complete after 193.680 msecs
[36648.372743] PM: resume of drv: dev:ep_00 complete after 193.660 msecs
[36648.372745] PM: resume of drv: dev:ep_81 complete after 193.674 msecs
[36648.400015] PM: resume of drv:hub dev:10-0:1.0 complete after 221.709 msecs
[36648.400019] PM: resume of drv:hub dev:11-0:1.0 complete after 221.651 msecs
[36648.400027] PM: resume of drv:hub dev:4-0:1.0 complete after 222.198 msecs
[36648.400033] PM: resume of drv: dev:ep_00 complete after 221.714 msecs
[36648.400035] PM: resume of drv: dev:ep_00 complete after 221.636 msecs
[36648.400037] PM: resume of drv: dev:ep_00 complete after 222.200 msecs
[36648.400039] PM: resume of drv: dev:ep_81 complete after 221.658 msecs
[36648.400041] PM: resume of drv: dev:ep_81 complete after 222.209 msecs
[36648.400052] PM: resume of drv: dev:ep_81 complete after 221.744 msecs
[36648.496050] ata7: SATA link down (SStatus 0 SControl 300)
[36648.500054] ata8: SATA link down (SStatus 0 SControl 300)
[36648.512040] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[36648.526239] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 349.793 msecs
[36648.570515] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 393.931 msecs
[36648.692021] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36648.692979] ata5.00: configured for UDMA/100
[36648.700019] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36648.732032] firewire_core: rediscovered device fw0
[36648.755666] ata6.00: configured for UDMA/100
[36648.876019] PM: resume of drv:hub dev:4-1:1.0 complete after 697.494 msecs
[36648.876025] PM: resume of drv: dev:ep_00 complete after 697.463 msecs
[36648.876033] PM: resume of drv: dev:ep_81 complete after 697.491 msecs
[36648.949845] usb 4-1.1: reset full-speed USB device number 3 using uhci_hcd
[36649.059835] btusb 4-1.1:1.0: no reset_resume for driver btusb?
[36649.059837] btusb 4-1.1:1.1: no reset_resume for driver btusb?
[36649.308130] PM: resume of drv:usb dev:4-1.1:1.0 complete after 1129.271 msecs
[36649.308139] PM: resume of drv:usb dev:4-1.1:1.1 complete after 1129.228 msecs
[36649.308142] PM: resume of drv: dev:ep_00 complete after 1129.137 msecs
[36649.308147] PM: resume of drv: dev:ep_83 complete after 1129.224 msecs
[36649.308150] PM: resume of drv:usb dev:4-1.1:1.3 complete after 1129.157 msecs
[36649.308153] PM: resume of drv: dev:ep_03 complete after 1129.215 msecs
[36649.308155] PM: resume of drv:usb dev:4-1.1:1.2 complete after 1129.204 msecs
[36649.308164] PM: resume of drv: dev:ep_81 complete after 1129.292 msecs
[36649.308167] PM: resume of drv: dev:ep_02 complete after 1129.269 msecs
[36649.308170] PM: resume of drv: dev:ep_82 complete after 1129.284 msecs
[36649.308172] PM: resume of drv: dev:ep_84 complete after 1129.207 msecs
[36649.308189] PM: resume of drv: dev:ep_04 complete after 1129.210 msecs
[36650.912014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36650.968014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36650.976014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36651.020230] ata1.00: configured for UDMA/133
[36651.070902] ata2.00: configured for UDMA/133
[36651.084824] PM: resume of drv:sd dev:0:0:0:0 complete after 2906.345 msecs
[36651.084834] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2906.343 msecs
[36651.084843] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2889.568 msecs
[36651.105986] ata3.00: configured for UDMA/133
[36651.135500] PM: resume of drv:sd dev:1:0:0:0 complete after 2956.924 msecs
[36651.135507] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 2956.914 msecs
[36651.178916] PM: resume of drv:sd dev:2:0:0:0 complete after 3000.095 msecs
[36651.178923] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3000.090 msecs
[36651.180012] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36651.281948] ata4.00: configured for UDMA/133
[36651.346542] PM: resume of drv:sd dev:3:0:0:0 complete after 3167.521 msecs
[36651.346550] PM: resume of drv:scsi_disk dev:3:0:0:0 complete after 167.620 msecs
[36651.346554] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 3167.518 msecs
[36651.346703] PM: resume of devices complete after 3170.399 msecs
[36651.347026] PM: resume devices took 3.168 seconds
[36651.347066] PM: Finishing wakeup.
[36651.347067] Restarting tasks ... done.
[36651.943061] r8169 0000:04:00.0: eth0: link down
[36651.943068] r8169 0000:04:00.0: eth0: link down
[36651.943744] ADDRCONF(NETDEV_UP): eth0: link is not ready
[36653.525445] r8169 0000:04:00.0: eth0: link up
[36653.526091] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[36655.590486] VFS: busy inodes on changed media or resized disk sr0
[36664.096006] eth0: no IPv6 routers present
[59904.448278] usb 1-2.1.2: new full-speed USB device number 15 using ehci_hcd
[59904.551831] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[59906.029815] usblp0: removed
[59906.041568] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[59908.030550] parport0: ppdev0 forgot to release port
[59969.455993] usblp0: removed
[59989.224727] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[60067.782950] usblp0: removed
[60144.830303] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[75885.311289] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[75885.311537] usb 1-2.1.2: USB disconnect, device number 15
[75885.311662] usblp0: removed
[75885.512294] usb 1-2.1.2: new full-speed USB device number 16 using ehci_hcd
[75885.616217] usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[75886.941836] usblp0: removed
[75886.954879] usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[84893.185848] hub 1-2.1:1.0: port 2 disabled by hub (EMI?), re-enabling...
[84893.186096] usb 1-2.1.2: USB disconnect, device number 16
[84893.186217] usblp0: removed
[84893.384228] usb 1-2.1.2: new full-speed USB device number 17 using ehci_hcd
[84893.487888] usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[84894.816522] usblp0: removed
[84894.827534] usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[88335.875250] usb 1-2.1.2: USB disconnect, device number 17
[88335.875391] usblp0: removed
[88771.679522] init: anacron main process (18783) killed by TERM signal
[88772.958523] PM: Syncing filesystems ... done.
[88773.036853] PM: Preparing system for mem sleep
[88773.036865] Freezing user space processes ... (elapsed 0.01 seconds) done.
[88773.052030] Freezing remaining freezable tasks ... (elapsed 0.43 seconds) done.
[88773.484020] PM: Entering mem sleep
[88773.484034] Suspending console(s) (use no_console_suspend to debug)
[88773.484476] sd 3:0:0:0: [sdh] Synchronizing SCSI cache
[88773.487871] sd 3:0:0:0: [sdh] Stopping disk
[88773.487917] sd 2:0:0:0: [sdg] Synchronizing SCSI cache
[88773.488000] sd 2:0:0:0: [sdg] Stopping disk
[88773.488051] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[88773.488113] sd 1:0:0:0: [sdb] Stopping disk
[88773.488139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[88773.488168] sd 0:0:0:0: [sda] Stopping disk
[88773.488195] parport_pc 00:08: disabled
[88773.488264] serial 00:07: disabled
[88773.488285] serial 00:07: wake-up capability disabled by ACPI
[88773.488599] ehci_hcd 0000:05:01.2: PCI INT C disabled
[88773.488624] ACPI handle has no context!
[88773.488887] pata_jmicron 0000:03:00.1: PCI INT B disabled
[88773.488973] ahci 0000:03:00.0: PCI INT A disabled
[88773.524036] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[88773.528044] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[88773.528068] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[88773.528075] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[88773.528090] uhci_hcd 0000:05:01.0: PCI INT A disabled
[88773.528108] uhci_hcd 0000:05:01.1: PCI INT B disabled
[88773.528123] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[88773.528134] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[88773.532020] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[88773.548012] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[88773.592073] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[88773.608010] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.968 msecs
[88775.088007] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 1 (-16).
[88775.088035] rt61pci 0000:05:00.0: PCI INT A disabled
[88775.088040] ACPI handle has no context!
[88775.104009] PM: suspend of drv:rt61pci dev:0000:05:00.0 complete after 1615.311 msecs
[88775.104024] PM: suspend of drv:pci dev:0000:00:1e.0 complete after 1615.137 msecs
[88775.104034] PM: suspend of drv: dev:pci0000:00 complete after 1614.474 msecs
[88775.104044] PM: suspend of devices complete after 1619.716 msecs
[88775.104047] PM: suspend devices took 1.620 seconds
[88775.104331] uhci_hcd 0000:05:01.1: PME# enabled
[88775.104340] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[88775.120034] uhci_hcd 0000:05:01.0: PME# enabled
[88775.120037] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[88775.136064] r8169 0000:04:00.0: PME# enabled
[88775.136070] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[88775.152137] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[88775.168034] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[88775.168058] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[88775.168083] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[88775.168203] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[88775.184033] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[88775.184056] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[88775.184080] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[88775.184140] PM: late suspend of devices complete after 80.090 msecs
[88775.184961] ACPI: Preparing to enter system sleep state S3
[88775.188474] PM: Saving platform NVS memory
[88775.188523] Disabling non-boot CPUs ...
[88775.292014] CPU 1 is now offline
[88775.396033] CPU 2 is now offline
[88775.500006] CPU 3 is now offline
[88775.500273] ACPI: Low-level resume complete
[88775.500273] PM: Restoring platform NVS memory
[88775.500273] Enabling non-boot CPUs ...
[88775.500273] Booting Node 0 Processor 1 APIC 0x1
[88775.500273] smpboot cpu 1: start_ip = 98000
[88775.189986] Calibrating delay loop (skipped) already calibrated this CPU
[88775.531724] NMI watchdog enabled, takes one hw-pmu counter.
[88775.532038] CPU1 is up
[88775.532114] Booting Node 0 Processor 2 APIC 0x3
[88775.532116] smpboot cpu 2: start_ip = 98000
[88775.293811] Calibrating delay loop (skipped) already calibrated this CPU
[88775.563485] NMI watchdog enabled, takes one hw-pmu counter.
[88775.564037] CPU2 is up
[88775.564116] Booting Node 0 Processor 3 APIC 0x2
[88775.564118] smpboot cpu 3: start_ip = 98000
[88775.397627] Calibrating delay loop (skipped) already calibrated this CPU
[88775.595577] NMI watchdog enabled, takes one hw-pmu counter.
[88775.596037] CPU3 is up
[88775.601261] ACPI: Waking up from system sleep state S3
[88775.603221] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[88775.603246] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[88775.603269] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[88775.603294] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[88775.603307] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[88775.603311] ehci_hcd 0000:00:1a.7: PME# disabled
[88775.603322] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10e)
[88775.603332] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa200004)
[88775.603335] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[88775.603339] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[88775.603390] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[88775.603396] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xfa71fa61)
[88775.603399] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfa00fa00)
[88775.603403] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x2000b0b0)
[88775.603408] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[88775.603412] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[88775.603438] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[88775.603444] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xfa51fa31)
[88775.603447] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
[88775.603451] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0f0, writing 0xc0c0)
[88775.603456] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[88775.603460] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[88775.603500] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[88775.603523] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[88775.603547] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[88775.603571] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[88775.603584] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[88775.603587] ehci_hcd 0000:00:1d.7: PME# disabled
[88775.603648] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xea01)
[88775.603692] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[88775.603698] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xa001)
[88775.603701] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[88775.603705] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[88775.603708] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[88775.603712] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[88775.603749] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[88775.603770] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[88775.603806] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[88775.603820] pata_jmicron 0000:03:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xb401)
[88775.603825] pata_jmicron 0000:03:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xb301)
[88775.603829] pata_jmicron 0000:03:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xb201)
[88775.603834] pata_jmicron 0000:03:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xb101)
[88775.603839] pata_jmicron 0000:03:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xb001)
[88775.603843] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[88775.603850] pata_jmicron 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[88775.603882] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[88775.603898] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf9000004)
[88775.603904] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xc001)
[88775.603909] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[88775.603915] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[88775.603959] rt61pci 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10c)
[88775.603972] rt61pci 0000:05:00.0: restoring config space at offset 0x4 (was 0xffff8000, writing 0xfa100000)
[88775.603976] rt61pci 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[88775.603981] rt61pci 0000:05:00.0: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100017)
[88775.616013] uhci_hcd 0000:05:01.0: BAR 4: set to [io 0xd000-0xd01f] (PCI address [0xd000-0xd01f])
[88775.616022] uhci_hcd 0000:05:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[88775.616038] uhci_hcd 0000:05:01.0: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[88775.616043] uhci_hcd 0000:05:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[88775.616053] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[88775.616058] uhci_hcd 0000:05:01.0: PME# disabled
[88775.632011] uhci_hcd 0000:05:01.1: BAR 4: set to [io 0xd100-0xd11f] (PCI address [0xd100-0xd11f])
[88775.632020] uhci_hcd 0000:05:01.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[88775.632036] uhci_hcd 0000:05:01.1: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[88775.632041] uhci_hcd 0000:05:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[88775.632054] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[88775.632059] uhci_hcd 0000:05:01.1: PME# disabled
[88775.648008] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[88775.664010] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[88775.664021] firewire_ohci 0000:05:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
[88775.664036] firewire_ohci 0000:05:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfa108000)
[88775.664041] firewire_ohci 0000:05:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfa10c000)
[88775.664045] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[88775.664051] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[88775.664281] PM: early resume of devices complete after 61.150 msecs
[88775.664346] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[88775.664353] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[88775.664373] usb usb4: root hub lost power or was reset
[88775.664438] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[88775.664446] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[88775.664448] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[88775.664455] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[88775.664474] usb usb5: root hub lost power or was reset
[88775.664476] usb usb6: root hub lost power or was reset
[88775.668045] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[88775.668057] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[88775.668062] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[88775.668068] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[88775.668087] usb usb7: root hub lost power or was reset
[88775.668121] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[88775.668123] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[88775.668131] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[88775.668132] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[88775.668154] usb usb8: root hub lost power or was reset
[88775.668156] usb usb9: root hub lost power or was reset
[88775.668170] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[88775.668179] pci 0000:00:1e.0: setting latency timer to 64
[88775.668180] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[88775.668194] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[88775.668212] rt61pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[88775.668221] usb usb10: root hub lost power or was reset
[88775.668223] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[88775.668226] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[88775.668235] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[88775.668260] usb usb11: root hub lost power or was reset
[88775.668282] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[88775.668314] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[88775.668320] r8169 0000:04:00.0: PME# disabled
[88775.668322] ahci 0000:00:1f.2: setting latency timer to 64
[88775.668416] sd 0:0:0:0: [sda] Starting disk
[88775.668434] sd 1:0:0:0: [sdb] Starting disk
[88775.668459] sd 2:0:0:0: [sdg] Starting disk
[88775.668507] sd 3:0:0:0: [sdh] Starting disk
[88775.669842] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[88775.669847] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[88775.669853] ahci 0000:03:00.0: setting latency timer to 64
[88775.669862] pata_jmicron 0000:03:00.1: setting latency timer to 64
[88775.670303] serial 00:07: activated
[88775.670666] parport_pc 00:08: activated
[88775.684029] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[88775.684034] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[88775.724109] firewire_core: skipped bus generations, destroying all nodes
[88775.769164] PM: resume of drv:hub dev:1-2:1.0 complete after 103.983 msecs
[88775.769189] PM: resume of drv: dev:ep_81 complete after 103.998 msecs
[88775.769194] PM: resume of drv: dev:ep_00 complete after 103.991 msecs
[88775.784055] PM: resume of drv:hub dev:6-0:1.0 complete after 119.184 msecs
[88775.784064] PM: resume of drv: dev:ep_00 complete after 119.172 msecs
[88775.784072] PM: resume of drv: dev:ep_81 complete after 119.193 msecs
[88775.784075] PM: resume of drv: dev:ep_00 complete after 119.237 msecs
[88775.784078] PM: resume of drv:hub dev:5-0:1.0 complete after 119.263 msecs
[88775.784083] PM: resume of drv: dev:ep_81 complete after 119.258 msecs
[88775.788037] PM: resume of drv:hub dev:8-0:1.0 complete after 123.067 msecs
[88775.788043] PM: resume of drv: dev:ep_81 complete after 123.060 msecs
[88775.788045] PM: resume of drv:hub dev:7-0:1.0 complete after 123.128 msecs
[88775.788047] PM: resume of drv: dev:ep_00 complete after 123.050 msecs
[88775.788051] PM: resume of drv: dev:ep_81 complete after 123.119 msecs
[88775.788055] PM: resume of drv: dev:ep_00 complete after 123.111 msecs
[88775.788071] PM: resume of drv:hub dev:9-0:1.0 complete after 123.047 msecs
[88775.788076] PM: resume of drv: dev:ep_81 complete after 123.039 msecs
[88775.788079] PM: resume of drv: dev:ep_00 complete after 123.031 msecs
[88775.816785] PM: resume of drv:usbhid dev:1-2.2:1.0 complete after 151.377 msecs
[88775.816787] PM: resume of drv: dev:ep_00 complete after 151.352 msecs
[88775.816790] PM: resume of drv: dev:ep_81 complete after 151.371 msecs
[88775.817408] PM: resume of drv:usbhid dev:1-2.4:1.0 complete after 151.950 msecs
[88775.817410] PM: resume of drv:usbhid dev:1-2.4:1.1 complete after 151.926 msecs
[88775.817414] PM: resume of drv: dev:ep_81 complete after 151.943 msecs
[88775.817415] PM: resume of drv: dev:ep_82 complete after 151.920 msecs
[88775.817419] PM: resume of drv: dev:ep_00 complete after 151.911 msecs
[88775.817903] PM: resume of drv:hub dev:1-2.1:1.0 complete after 152.547 msecs
[88775.817908] PM: resume of drv: dev:ep_81 complete after 152.539 msecs
[88775.817911] PM: resume of drv: dev:ep_00 complete after 152.530 msecs
[88775.864782] PM: resume of drv:usbhid dev:1-2.1.4:1.0 complete after 199.005 msecs
[88775.864784] PM: resume of drv: dev:ep_00 complete after 198.980 msecs
[88775.864787] PM: resume of drv: dev:ep_81 complete after 198.999 msecs
[88775.892024] PM: resume of drv:hub dev:4-0:1.0 complete after 227.267 msecs
[88775.892028] PM: resume of drv:hub dev:10-0:1.0 complete after 226.953 msecs
[88775.892035] PM: resume of drv: dev:ep_00 complete after 226.934 msecs
[88775.892041] PM: resume of drv: dev:ep_00 complete after 227.251 msecs
[88775.892048] PM: resume of drv: dev:ep_81 complete after 227.268 msecs
[88775.892050] PM: resume of drv: dev:ep_81 complete after 226.961 msecs
[88775.892054] PM: resume of drv:hub dev:11-0:1.0 complete after 226.925 msecs
[88775.892070] PM: resume of drv: dev:ep_81 complete after 226.931 msecs
[88775.892077] PM: resume of drv: dev:ep_00 complete after 226.925 msecs
[88776.004034] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[88776.004040] ata8: SATA link down (SStatus 0 SControl 300)
[88776.004100] ata7: SATA link down (SStatus 0 SControl 300)
[88776.018250] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 353.869 msecs
[88776.058965] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 394.480 msecs
[88776.168014] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88776.168966] ata5.00: configured for UDMA/100
[88776.192013] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88776.224031] firewire_core: rediscovered device fw0
[88776.249161] ata6.00: configured for UDMA/100
[88776.368028] PM: resume of drv:hub dev:4-1:1.0 complete after 702.761 msecs
[88776.368039] PM: resume of drv: dev:ep_00 complete after 702.747 msecs
[88776.368042] PM: resume of drv: dev:ep_81 complete after 702.762 msecs
[88776.441759] usb 4-1.1: reset full-speed USB device number 3 using uhci_hcd
[88776.551753] btusb 4-1.1:1.0: no reset_resume for driver btusb?
[88776.551756] btusb 4-1.1:1.1: no reset_resume for driver btusb?
[88776.800135] PM: resume of drv:usb dev:4-1.1:1.0 complete after 1134.562 msecs
[88776.800138] PM: resume of drv:usb dev:4-1.1:1.2 complete after 1134.476 msecs
[88776.800149] PM: resume of drv: dev:ep_82 complete after 1134.551 msecs
[88776.800154] PM: resume of drv: dev:ep_02 complete after 1134.545 msecs
[88776.800159] PM: resume of drv: dev:ep_81 complete after 1134.569 msecs
[88776.800162] PM: resume of drv:usb dev:4-1.1:1.3 complete after 1134.462 msecs
[88776.800165] PM: resume of drv: dev:ep_84 complete after 1134.489 msecs
[88776.800185] PM: resume of drv:usb dev:4-1.1:1.1 complete after 1134.543 msecs
[88776.800192] PM: resume of drv: dev:ep_00 complete after 1134.456 msecs
[88776.800194] PM: resume of drv: dev:ep_04 complete after 1134.501 msecs
[88776.800204] PM: resume of drv: dev:ep_83 complete after 1134.569 msecs
[88776.800210] PM: resume of drv: dev:ep_03 complete after 1134.563 msecs
[88778.464013] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88778.476014] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88778.500013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88778.568014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88778.572917] ata3.00: configured for UDMA/133
[88778.575326] ata4.00: configured for UDMA/133
[88778.631596] PM: resume of drv:sd dev:3:0:0:0 complete after 2965.856 msecs
[88778.631605] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 2965.853 msecs
[88778.645845] PM: resume of drv:sd dev:2:0:0:0 complete after 2980.310 msecs
[88778.645853] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2980.307 msecs
[88778.672760] ata1.00: configured for UDMA/133
[88778.737360] PM: resume of drv:sd dev:0:0:0:0 complete after 3072.131 msecs
[88778.737369] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3072.128 msecs
[88778.737373] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3049.920 msecs
[88778.789711] ata2.00: configured for UDMA/133
[88778.854307] PM: resume of drv:sd dev:1:0:0:0 complete after 3188.988 msecs
[88778.854316] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 3188.984 msecs
[88778.854319] PM: resume of drv:scsi_disk dev:1:0:0:0 complete after 116.932 msecs
[88778.854522] PM: resume of devices complete after 3190.213 msecs
[88778.854888] PM: resume devices took 3.188 seconds
[88778.854930] PM: Finishing wakeup.
[88778.854931] Restarting tasks ... done.
[88779.417039] r8169 0000:04:00.0: eth0: link down
[88779.417045] r8169 0000:04:00.0: eth0: link down
[88779.417669] ADDRCONF(NETDEV_UP): eth0: link is not ready
[88781.030833] r8169 0000:04:00.0: eth0: link up
[88781.031483] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[88783.365653] VFS: busy inodes on changed media or resized disk sr0
[88791.952005] eth0: no IPv6 routers present
[98375.409544] PM: Syncing filesystems ... done.
[98375.487062] PM: Preparing system for mem sleep
[98375.487073] Freezing user space processes ... (elapsed 0.01 seconds) done.
[98375.500030] Freezing remaining freezable tasks ... (elapsed 4.52 seconds) done.
[98380.028020] PM: Entering mem sleep
[98380.028033] Suspending console(s) (use no_console_suspend to debug)
[98380.028459] sd 3:0:0:0: [sdh] Synchronizing SCSI cache
[98380.031801] sd 3:0:0:0: [sdh] Stopping disk
[98380.031822] sd 2:0:0:0: [sdg] Synchronizing SCSI cache
[98380.031911] sd 2:0:0:0: [sdg] Stopping disk
[98380.031980] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[98380.032050] sd 1:0:0:0: [sdb] Stopping disk
[98380.032091] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[98380.032128] sd 0:0:0:0: [sda] Stopping disk
[98380.032216] parport_pc 00:08: disabled
[98380.032293] serial 00:07: disabled
[98380.032314] serial 00:07: wake-up capability disabled by ACPI
[98380.032564] ehci_hcd 0000:05:01.2: PCI INT C disabled
[98380.032583] ACPI handle has no context!
[98380.032886] pata_jmicron 0000:03:00.1: PCI INT B disabled
[98380.032912] ahci 0000:03:00.0: PCI INT A disabled
[98380.068043] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[98380.072061] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[98380.072065] uhci_hcd 0000:05:01.0: PCI INT A disabled
[98380.072092] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[98380.072106] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[98380.072110] uhci_hcd 0000:05:01.1: PCI INT B disabled
[98380.072128] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[98380.072133] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[98380.076017] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[98380.092009] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[98380.152084] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[98380.168011] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.984 msecs
[98381.632008] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 1 (-16).
[98381.632037] rt61pci 0000:05:00.0: PCI INT A disabled
[98381.632042] ACPI handle has no context!
[98381.648010] PM: suspend of drv:rt61pci dev:0000:05:00.0 complete after 1615.345 msecs
[98381.648022] PM: suspend of drv:pci dev:0000:00:1e.0 complete after 1613.757 msecs
[98381.648032] PM: suspend of drv: dev:pci0000:00 complete after 1599.484 msecs
[98381.648037] PM: suspend of devices complete after 1619.711 msecs
[98381.648040] PM: suspend devices took 1.620 seconds
[98381.648302] uhci_hcd 0000:05:01.1: PME# enabled
[98381.648309] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[98381.664034] uhci_hcd 0000:05:01.0: PME# enabled
[98381.664037] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[98381.680063] r8169 0000:04:00.0: PME# enabled
[98381.680069] pcieport 0000:00:1c.5: wake-up capability enabled by ACPI
[98381.696136] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[98381.712034] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[98381.712058] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[98381.712082] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[98381.712192] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[98381.728032] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[98381.728056] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[98381.728080] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[98381.728142] PM: late suspend of devices complete after 80.099 msecs
[98381.728964] ACPI: Preparing to enter system sleep state S3
[98381.732529] PM: Saving platform NVS memory
[98381.732575] Disabling non-boot CPUs ...
[98381.836015] CPU 1 is now offline
[98381.940032] CPU 2 is now offline
[98382.044006] CPU 3 is now offline
[98382.044303] ACPI: Low-level resume complete
[98382.044303] PM: Restoring platform NVS memory
[98382.044303] Enabling non-boot CPUs ...
[98382.044303] Booting Node 0 Processor 1 APIC 0x1
[98382.044303] smpboot cpu 1: start_ip = 98000
[98381.734117] Calibrating delay loop (skipped) already calibrated this CPU
[98382.075726] NMI watchdog enabled, takes one hw-pmu counter.
[98382.076056] CPU1 is up
[98382.076135] Booting Node 0 Processor 2 APIC 0x3
[98382.076137] smpboot cpu 2: start_ip = 98000
[98381.837828] Calibrating delay loop (skipped) already calibrated this CPU
[98382.107503] NMI watchdog enabled, takes one hw-pmu counter.
[98382.108062] CPU2 is up
[98382.108139] Booting Node 0 Processor 3 APIC 0x2
[98382.108141] smpboot cpu 3: start_ip = 98000
[98381.941575] Calibrating delay loop (skipped) already calibrated this CPU
[98382.139623] NMI watchdog enabled, takes one hw-pmu counter.
[98382.140041] CPU3 is up
[98382.145273] ACPI: Waking up from system sleep state S3
[98382.147192] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[98382.147217] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[98382.147241] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[98382.147266] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[98382.147279] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[98382.147282] ehci_hcd 0000:00:1a.7: PME# disabled
[98382.147293] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10e)
[98382.147303] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa200004)
[98382.147307] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[98382.147311] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[98382.147361] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[98382.147367] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xfa71fa61)
[98382.147370] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfa00fa00)
[98382.147374] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x2000b0b0)
[98382.147379] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[98382.147383] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[98382.147409] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[98382.147415] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xfa51fa31)
[98382.147418] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
[98382.147422] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0f0, writing 0xc0c0)
[98382.147427] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[98382.147431] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[98382.147471] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[98382.147494] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[98382.147517] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[98382.147541] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[98382.147554] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[98382.147557] ehci_hcd 0000:00:1d.7: PME# disabled
[98382.147618] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xea01)
[98382.147662] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[98382.147668] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xa001)
[98382.147671] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[98382.147675] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[98382.147678] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[98382.147682] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[98382.147719] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[98382.147740] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[98382.147776] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20f)
[98382.147790] pata_jmicron 0000:03:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xb401)
[98382.147795] pata_jmicron 0000:03:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xb301)
[98382.147799] pata_jmicron 0000:03:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xb201)
[98382.147804] pata_jmicron 0000:03:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xb101)
[98382.147809] pata_jmicron 0000:03:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xb001)
[98382.147813] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[98382.147820] pata_jmicron 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[98382.147852] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[98382.147868] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf9000004)
[98382.147874] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xc001)
[98382.147879] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[98382.147885] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[98382.147929] rt61pci 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10c)
[98382.147942] rt61pci 0000:05:00.0: restoring config space at offset 0x4 (was 0xffff8000, writing 0xfa100000)
[98382.147946] rt61pci 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[98382.147950] rt61pci 0000:05:00.0: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100017)
[98382.160013] uhci_hcd 0000:05:01.0: BAR 4: set to [io 0xd000-0xd01f] (PCI address [0xd000-0xd01f])
[98382.160022] uhci_hcd 0000:05:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[98382.160038] uhci_hcd 0000:05:01.0: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[98382.160044] uhci_hcd 0000:05:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[98382.160053] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[98382.160058] uhci_hcd 0000:05:01.0: PME# disabled
[98382.176017] uhci_hcd 0000:05:01.1: BAR 4: set to [io 0xd100-0xd11f] (PCI address [0xd100-0xd11f])
[98382.176025] uhci_hcd 0000:05:01.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[98382.176042] uhci_hcd 0000:05:01.1: restoring config space at offset 0x3 (was 0x801600, writing 0x802008)
[98382.176047] uhci_hcd 0000:05:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100003)
[98382.176060] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[98382.176064] uhci_hcd 0000:05:01.1: PME# disabled
[98382.192010] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[98382.208009] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[98382.208019] firewire_ohci 0000:05:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
[98382.208034] firewire_ohci 0000:05:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfa108000)
[98382.208039] firewire_ohci 0000:05:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfa10c000)
[98382.208044] firewire_ohci 0000:05:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[98382.208050] firewire_ohci 0000:05:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[98382.208278] PM: early resume of devices complete after 61.174 msecs
[98382.208351] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[98382.208359] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[98382.208364] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[98382.208367] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[98382.208369] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[98382.208379] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[98382.208404] usb usb4: root hub lost power or was reset
[98382.208406] usb usb5: root hub lost power or was reset
[98382.208409] usb usb6: root hub lost power or was reset
[98382.208469] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[98382.208477] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[98382.208532] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[98382.208542] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[98382.208544] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[98382.208555] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[98382.208570] usb usb7: root hub lost power or was reset
[98382.208585] usb usb8: root hub lost power or was reset
[98382.208623] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[98382.208633] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[98382.208654] usb usb9: root hub lost power or was reset
[98382.208684] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[98382.208694] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[98382.208731] pci 0000:00:1e.0: setting latency timer to 64
[98382.208750] rt61pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[98382.208753] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[98382.208756] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[98382.208816] usb usb11: root hub lost power or was reset
[98382.208818] usb usb10: root hub lost power or was reset
[98382.208828] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[98382.208843] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[98382.208855] pcieport 0000:00:1c.5: wake-up capability disabled by ACPI
[98382.208865] r8169 0000:04:00.0: PME# disabled
[98382.208871] ahci 0000:00:1f.2: setting latency timer to 64
[98382.208912] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[98382.209037] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[98382.209047] ahci 0000:03:00.0: setting latency timer to 64
[98382.209073] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[98382.209111] pata_jmicron 0000:03:00.1: setting latency timer to 64
[98382.209820] serial 00:07: activated
[98382.210141] parport_pc 00:08: activated
[98382.212399] sd 0:0:0:0: [sda] Starting disk
[98382.212499] sd 1:0:0:0: [sdb] Starting disk
[98382.212741] sd 2:0:0:0: [sdg] Starting disk
[98382.212967] sd 3:0:0:0: [sdh] Starting disk
[98382.224013] ehci_hcd 0000:05:01.2: Refused to change power state, currently in D3
[98382.224017] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[98382.264106] firewire_core: skipped bus generations, destroying all nodes
[98382.328046] PM: resume of drv: dev:ep_00 complete after 115.983 msecs
[98382.328056] PM: resume of drv:hub dev:5-0:1.0 complete after 119.024 msecs
[98382.328090] PM: resume of drv:hub dev:6-0:1.0 complete after 117.656 msecs
[98382.328095] PM: resume of drv: dev:ep_00 complete after 117.756 msecs
[98382.328099] PM: resume of drv: dev:ep_81 complete after 118.974 msecs
[98382.328107] PM: resume of drv: dev:ep_81 complete after 116.060 msecs
[98382.332069] PM: resume of drv:hub dev:7-0:1.0 complete after 119.982 msecs
[98382.332074] PM: resume of drv: dev:ep_00 complete after 119.960 msecs
[98382.332077] PM: resume of drv:hub dev:8-0:1.0 complete after 119.937 msecs
[98382.332082] PM: resume of drv: dev:ep_00 complete after 119.916 msecs
[98382.332086] PM: resume of drv: dev:ep_81 complete after 119.985 msecs
[98382.332089] PM: resume of drv: dev:ep_81 complete after 119.936 msecs
[98382.332111] PM: resume of drv:hub dev:9-0:1.0 complete after 119.918 msecs
[98382.332121] PM: resume of drv: dev:ep_81 complete after 119.915 msecs
[98382.332123] PM: resume of drv: dev:ep_00 complete after 119.903 msecs
[98382.356783] PM: resume of drv:usbhid dev:1-2.1.4:1.0 complete after 143.743 msecs
[98382.356786] PM: resume of drv: dev:ep_00 complete after 143.719 msecs
[98382.356789] PM: resume of drv: dev:ep_81 complete after 143.737 msecs
[98382.432036] PM: resume of drv:hub dev:4-0:1.0 complete after 223.020 msecs
[98382.432041] PM: resume of drv: dev:ep_00 complete after 223.021 msecs
[98382.432050] PM: resume of drv: dev:ep_81 complete after 223.032 msecs
[98382.436048] PM: resume of drv:hub dev:10-0:1.0 complete after 223.803 msecs
[98382.436055] PM: resume of drv:hub dev:11-0:1.0 complete after 223.757 msecs
[98382.436057] PM: resume of drv: dev:ep_00 complete after 223.786 msecs
[98382.436064] PM: resume of drv: dev:ep_81 complete after 223.801 msecs
[98382.436071] PM: resume of drv: dev:ep_00 complete after 223.739 msecs
[98382.436073] PM: resume of drv: dev:ep_81 complete after 223.760 msecs
[98382.544052] ata8: SATA link down (SStatus 0 SControl 300)
[98382.544059] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[98382.548071] ata7: SATA link down (SStatus 0 SControl 300)
[98382.558075] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 349.659 msecs
[98382.602864] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 394.380 msecs
[98382.708014] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98382.716013] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98382.716962] ata5.00: configured for UDMA/100
[98382.764032] firewire_core: rediscovered device fw0
[98382.766972] ata6.00: configured for UDMA/100
[98382.912018] PM: resume of drv:hub dev:4-1:1.0 complete after 699.559 msecs
[98382.912034] PM: resume of drv: dev:ep_00 complete after 699.550 msecs
[98382.912039] PM: resume of drv: dev:ep_81 complete after 699.569 msecs
[98382.985031] usb 4-1.1: reset full-speed USB device number 3 using uhci_hcd
[98383.095023] btusb 4-1.1:1.0: no reset_resume for driver btusb?
[98383.095026] btusb 4-1.1:1.1: no reset_resume for driver btusb?
[98383.344135] PM: resume of drv:usb dev:4-1.1:1.0 complete after 1131.322 msecs
[98383.344139] PM: resume of drv:usb dev:4-1.1:1.3 complete after 1131.196 msecs
[98383.344145] PM: resume of drv: dev:ep_00 complete after 1131.192 msecs
[98383.344154] PM: resume of drv: dev:ep_82 complete after 1131.315 msecs
[98383.344160] PM: resume of drv:usb dev:4-1.1:1.1 complete after 1131.296 msecs
[98383.344170] PM: resume of drv: dev:ep_02 complete after 1131.309 msecs
[98383.344186] PM: resume of drv: dev:ep_81 complete after 1131.336 msecs
[98383.344191] PM: resume of drv: dev:ep_83 complete after 1131.299 msecs
[98383.344193] PM: resume of drv: dev:ep_03 complete after 1131.304 msecs
[98383.344195] PM: resume of drv:usb dev:4-1.1:1.2 complete after 1131.294 msecs
[98383.344215] PM: resume of drv: dev:ep_84 complete after 1131.301 msecs
[98383.344219] PM: resume of drv: dev:ep_04 complete after 1131.292 msecs
[98384.892014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98384.956013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98384.984418] ata3.00: configured for UDMA/133
[98385.024019] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98385.049018] PM: resume of drv:sd dev:2:0:0:0 complete after 2836.277 msecs
[98385.049026] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2836.267 msecs
[98385.072819] ata2.00: configured for UDMA/133
[98385.108012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98385.132253] ata4.00: configured for UDMA/133
[98385.145741] PM: resume of drv:sd dev:1:0:0:0 complete after 2933.242 msecs
[98385.145748] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 2933.231 msecs
[98385.196847] PM: resume of drv:sd dev:3:0:0:0 complete after 2983.879 msecs
[98385.196854] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 2983.869 msecs
[98385.208425] ata1.00: configured for UDMA/133
[98385.273026] PM: resume of drv:sd dev:0:0:0:0 complete after 3060.636 msecs
[98385.273037] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3060.629 msecs
[98385.273043] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3045.607 msecs
[98385.273223] PM: resume of devices complete after 3064.918 msecs
[98385.273553] PM: resume devices took 3.064 seconds
[98385.273592] PM: Finishing wakeup.
[98385.273593] Restarting tasks ... done.
[98385.800130] r8169 0000:04:00.0: eth0: link down
[98385.800137] r8169 0000:04:00.0: eth0: link down
[98385.800777] ADDRCONF(NETDEV_UP): eth0: link is not ready
[98387.476900] r8169 0000:04:00.0: eth0: link up
[98387.477513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[98389.477942] VFS: busy inodes on changed media or resized disk sr0
[98397.520012] eth0: no IPv6 routers present
[98924.108308] usb 1-2.1.3: new high-speed USB device number 18 using ehci_hcd
[99038.536344] usb 1-2.3: new low-speed USB device number 19 using ehci_hcd
[99038.641812] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.3/1-2.3:1.0/input/input16
[99038.642025] generic-usb 0003:04D9:1400.0007: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1a.7-2.3/input0
[99038.654002] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.3/1-2.3:1.1/input/input17
[99038.654124] generic-usb 0003:04D9:1400.0008: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1a.7-2.3/input1